Key Features:
- Cycle progresses automatically through conditioning, sterilizing, exhaust, and venting phases.
- Constructed from SUS304 or SUS316L stainless steel for durability and corrosion resistance.
- Two sterilization temperatures: 121°C/134°C, auto-starts once reached.
- Timer starts only after preset temperature is achieved, ensuring full sterilization.
- Manual door operation via rotating handle.
- Silicone rubber seals ensure uniform pressure sealing.
- High-capacity cylindrical chamber for diverse sterilization needs.
Parameters:
Rated Working Pressure: 0.22 MPa
Rated Voltage: AC220 V + 22 V, 50 + 1 Hz
Input Power: ≤ 1800 VA
Sterilization Temperature: 121℃ /134℃
Water Tank Volume: About 1 Liter
Noise: <70 db
Notes:
- Please do not place the sterilizer on an unstable worktable, such as a shaking table, slope, or the position of the vibration.
- Do not share the same electric outllet with other electrical apparetus.
- Please pay attention to correct voltage and frequency.
- Please do not block or cover the sterilizer door and vent.
- Please do not place anything on the sterilizer.
- Please close steam discharge valve before the disinfection.
- Before each use, must supply 800ml of distilled water .
- You can close the door after the tray is placed well. Turn the door handle clockwise until the door control light is green.
- The door handle of the sterilizer should be screwed tightly, otherwise the sealing ring will burst out during the sterilization process.
- When the pressure drops to 0 and wait 1-2 minutes, you can open the door.
- Always use the anti-heat gloves to load or unload the tray into the sterilizer in order to avoid scald.
Package Contents:
- 2 x Instrument Tray
- 1 x Instrument Tray Rack
- 1 x Protective Glove
- 1 x Draining Hose
- 1 x Instructions
- 1 x Door Seal
//////////////////////////////////////////////////////////////////////
This product uses violet light to kill microorganisms.It is suitable for eliminating microorganisms on glass,metal and plastic tools;it provides a clean and hygienic environment for storing tools and so on.
Instructions:
1. Place the tool on the tray evenly after the tool is cleaned and dried.
2.Place the machine on a stable place or hang it vertically on the wall.
3.Be sure to close the door. Before turning on the power,make sure that the door control is turned on.
4.Check whether the lamp is working.If it does not work, open the door afterturning off the power
and tighten the lamp to ensure that it is well connected with the socket.
5.The cabinet is equipped with a door control system,and the power is automatically cut off when
the door is opened.
6.Working for 15 minutes is enough to kill the microorganisms on the tool.
Tips:
1.Not suitable for destroying liquid microorganisms.
2.The product has a door control system.For safety,please cut off the power before opening the
door.
3.When cleaning the cabinet,please use a wet towel,please donot wash it directly with water.
4.lf there is any failure during use,please contact the maintenance staff at any time.Non-
professionals should not disassemble.
Product parameters:
Power:30W
Voltage：110V
Frequency:60HZ
Volume：54L
Working time:15min
Size:620*230*470mm
