eBay

Exterior Patio Floor Paint – Durable, Oil Resistant & Easy to Apply

High-quality single pack patio paint designed for concrete, stone and paving. Ideal for patios, walkways and outdoor areas, this hard-wearing coating seals and protects surfaces while reducing dust. Suitable for bare or previously painted surfaces with no primer required.

Can be applied over existing coatings (except water-based paints), making it a quick and easy upgrade for tired patios.

👉 Also available in a non-slip version (this listing is for smooth finish).

⚠️ Important Usage Note
This product is designed for foot traffic areas only. It is not suitable for vehicle traffic or driveways, as tyre friction may cause the coating to lift.

📊 Technical Information

Coverage: Approx. 8m² per litre (We cannot be held responsible for variations in coverage due to absorption rates or application techniques.)

Drying Time:

Touch dry: 2–4 hours
Recoat: 12–24 hours
Light foot traffic: 4 days
Full cure: 7 days
Application: Brush or medium pile solvent-resistant roller
Thinners: T0001 Thinners (see item number 145275000009)
Shelf Life: 12 months

🔧 Key Features

3-in-1 Formula – primes, seals and protects surfaces - No separate primer required on bare concrete (first coat must be thinned by 20% with TA Paints T0001 Thinners – item number 145275000009)
Oil-resistant finish – helps withstand spills and outdoor use
Dust-reducing coating – seals porous concrete and paving
Suitable for concrete, stone, brick and wood.

✔ General Preparation
Ensure surface is clean, dry and free from grease, oil or contaminants
The floor must be completely dry prior to application. Painting onto damp or wet surfaces can lead to coating failure and delamination.

🔄 Mixing Instructions
Always stir thoroughly before use. Pigments may settle during storage and colour float may be visible prior to mixing.
To mix correctly:
• Use a slow-running drill with paddle mixer (recommended).
• For smaller cans, use a suitable palette knife reaching the base of the tin.
• Mix continuously for 3–5 minutes to ensure uniformity.
• Add thinners only after full mixing.