• Description:
  • Our Universal Cold Air Intake are available in round, tapered (cone style) and oval designs, for just about any special application. They are designed and manufactured for a wide variety of applications. Regardless of the angle, offset diameter of the cold air intake, there is a Universal cold air intake for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. Therefore, this Universal Car Auto Racing Direct Cold Air Filter Injection Intake Kit System Custom built adjustable cold air injection pipe to suit most vehicles by changing the direction of pipes!
  • 3" High Flow Inlet Cold Air Intake Cone Replacement Dry Air Filter Red Universal

    Description:

    Our Universal Cold Air Intake are available in round, tapered (cone style) and oval designs, for just about any special application. They are designed and manufactured for a wide variety of applications. Regardless of the angle, offset diameter of the cold air intake, there is a Universal cold air intake for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. Therefore, this Universal Car Auto Racing Direct Cold Air Filter Injection Intake Kit System Custom built adjustable cold air injection pipe to suit most vehicles by changing the direction of pipes!

     

    Improves Horsepower And Acceleration

    Provides up to 95% filtration efficiency.

    Universally works with 76mm/3'' air intake system.

    Pleated Synthetic material - NO oiling required

    Washable with water or soap and reusable.

    Adjustable piping to fit even the most complex engine bay

    Conical style with mesh design, catch impurities in air to prolong the engine life.

    Improve Throttle response and ensure better engine performance.

    High quality polyurethane polymer neck and a pleated synthetic dual cone shaped filter element.

    Dual-cone construction for maximum surface area, enabling the maximum possible flow rate.

    Be constructed by using a specially formulated synthetic filter material sandwiched between two epoxy-coated aluminium wire mesh for structural support.

     

    Specification:

    Type: Air filter

    Weight: 1.1 lb (0.5 kg)

    Material: Cotton Gauze, Aluminum, ABS Plastic

    Height: 145mm/5.7"

    Bottom diameter Size: 150mm/5.9"

    Colour: Red

    Connector Inside Diameter: 3 in (76 mm)

    Product Style: Round Tapered Universal Cold Air Intake

    Features: Easy to fit

     

    PACKAGE:

    1 * 76mm 3" Air Filter

    1 * Clamp

     

    NOTE:

    « Please check the size measurement chart carefully before making payment

    « Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm).

    « No instruction included. Professional installation is recommended.

     

    ----------------------------------------------------------------------------------------------------------------------------------------------------

    Why choose us

     

    →Location Description

    To improve your buying experience and ensure fast delivery, Your order will be shipped from the warehouse located in either new jersey or california that is closest to your address. If you have any questions, Please contact us. Thank you for your support !

     

    Superior Quality
    We have dedicated quality inspectors, and each product will be carefully inspected after production. Make sure the product is in good condition and can be used normally.

     

     

     


    Item Specifics
    Features Easy to fit Easy Installation
    Manufacturer Warranty 12 Month
    Product Style Round Tapered Universal Cold Air Intake
    OE/OEM Part Number /
    Performance Part Yes
    Material Cotton Gauze, Aluminum, ABS Plastic
    Bottom diameter Size 150mm/5.9"
    Shape Oval
    Connector Inside Diameter 3 in (76 mm)
    Placement on Vehicle Front
    Gasket Material Metal
    Brand Unbranded
    Mounting Style Clamp-On
    Type Air filter
    Items Included CLAMP
    Color Red
    Height 145mm/5.7"
    Weight 1.1 lb (0.5 kg)
    PACKAGE 1 * 76mm 3" Air Filter 1 * Clamp

    Payment

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    Shipping

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    Returns

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    Contact Us

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    FAQ

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Picture
    3" High Flow Inlet Cold Air Intake Cone Replacement Dry Air Filter Red Universal

    Description:

    Our Universal Cold Air Intake are available in round, tapered (cone style) and oval designs, for just about any special application. They are designed and manufactured for a wide variety of applications. Regardless of the angle, offset diameter of the cold air intake, there is a Universal cold air intake for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. Therefore, this Universal Car Auto Racing Direct Cold Air Filter Injection Intake Kit System Custom built adjustable cold air injection pipe to suit most vehicles by changing the direction of pipes!

     

    Improves Horsepower And Acceleration

    Provides up to 95% filtration efficiency.

    Universally works with 76mm/3'' air intake system.

    Pleated Synthetic material - NO oiling required

    Washable with water or soap and reusable.

    Adjustable piping to fit even the most complex engine bay

    Conical style with mesh design, catch impurities in air to prolong the engine life.

    Improve Throttle response and ensure better engine performance.

    High quality polyurethane polymer neck and a pleated synthetic dual cone shaped filter element.

    Dual-cone construction for maximum surface area, enabling the maximum possible flow rate.

    Be constructed by using a specially formulated synthetic filter material sandwiched between two epoxy-coated aluminium wire mesh for structural support.

     

    Specification:

    Type: Air filter

    Weight: 1.1 lb (0.5 kg)

    Material: Cotton Gauze, Aluminum, ABS Plastic

    Height: 145mm/5.7"

    Bottom diameter Size: 150mm/5.9"

    Colour: Red

    Connector Inside Diameter: 3 in (76 mm)

    Product Style: Round Tapered Universal Cold Air Intake

    Features: Easy to fit

     

    PACKAGE:

    1 * 76mm 3" Air Filter

    1 * Clamp

     

    NOTE:

    « Please check the size measurement chart carefully before making payment

    « Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm).

    « No instruction included. Professional installation is recommended.

     

    ----------------------------------------------------------------------------------------------------------------------------------------------------

    Why choose us

     

    →Location Description

    To improve your buying experience and ensure fast delivery, Your order will be shipped from the warehouse located in either new jersey or california that is closest to your address. If you have any questions, Please contact us. Thank you for your support !

     

    Superior Quality
    We have dedicated quality inspectors, and each product will be carefully inspected after production. Make sure the product is in good condition and can be used normally.

     

     

     

    Item Specifics
    Features :Easy to fit Easy Installation
    Manufacturer Warranty :12 Month
    Product Style :Round Tapered Universal Cold Air Intake
    OE/OEM Part Number :/
    Performance Part :Yes
    Material :Cotton Gauze, Aluminum, ABS Plastic
    Bottom diameter Size :150mm/5.9"
    Shape :Oval
    Connector Inside Diameter :3 in (76 mm)
    Placement on Vehicle :Front
    Gasket Material :Metal
    Brand :Unbranded
    Mounting Style :Clamp-On
    Type :Air filter
    Items Included :CLAMP
    Color :Red
    Height :145mm/5.7"
    Weight :1.1 lb (0.5 kg)
    PACKAGE :1 * 76mm 3" Air Filter 1 * Clamp


    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.


    All rights reserved.



    On Apr 4, 2026 at 13:03:05 PDT, seller added the following information:

    Datacaciques