Brand new in original padded box. Ships right away in the USA

The receiver features HDMI and VGA dual ports, utilizing WiFi transmission technology for point-to-point connections between transmitter and receiver devices. This enables the synchronization of images and videos from devices such as MAC, laptops, PCs, phones, and set-top boxes to HDTVs, projectors, or monitors.

Use a 5V2A adapter to connect the transmitter in the following situations:

• When the computer is low on power.

• When the HDMI port on some computers provides insufficient power, causing the transmitter's power light to dim or go out. In this case, use a Type-C cable to support the transmitter.

Multiple interfaces

The receiver features HDMI and VGA dual ports, utilizing WiFi transmission technology for point-to-point connections between the transmitter and receiver.

Installation Steps:

• Plug the transmitter into the HDMI or VGA port of your device (laptop, PC, satellite box, game console).

• Connect the receiver to the desired screen through the HDMI or VGA port. Use a Type-C cable and a 5V/2A charger for the receiver. Finally, press the play button.

Dual Antenna Design

The device features dual antennas supporting 5G high-speed transmission, with a signal range of up to 98 feet (30 meters). It can transmit signals through walls, floors, and ceilings. (Note: Signal distance is reduced when transmitting through walls.)

The receiver includes HDMI, VGA, and audio ports, supporting external audio connections.

Easily start mirroring transmission after connected, simple and efficient operation

Say Goodbye to Messy Cables

Enjoy a clear picture on large screens with virtually no delay and smooth performance. Avoid the hassle of using multiple HDMI cables to connect devices in your TV room or office.

Switch Between Multiple Devices

The wireless HDMI transmitter and receiver allow you to switch between up to 5 different devices. For seamless business meetings, simply press the transmitter's signal switch to mirror the desired screen.

For Apple System:

• Connect your phone to the transmitter's WiFi network (SSID: RX-xxxxxx, Password: 12345678).

• Open a browser and enter "192.168.203.1".

• Navigate to "Setting", click "Resolution", and select "3840x2160".

For Android System:

• In the phone settings, go to WiFi, find and connect to the Mira Screen device (SSID: RX-xxxxxx, Password: 12345678).

• Open a browser on your phone/tablet and enter "192.168.203.1".

• Navigate to "Setting", click "Resolution", and select "3840x2160 30P".

Click on "Internet" and connect to your home router's WiFi.

One-Touch Disconnect ＆ Reconnect

A button on the transmitter allows for quick disconnect or reconnect to your device, providing an easy way to protect your private content.