This is sleeved cylinder at Std bore size.

Unlike the Nikasil plated cylinders this can be bored oversize.

This is from a recently rebuilt engine that had water in the cylinders.

All cylinders had rust that has been cleaned with a ball hone so

it can be inspected. It will need to be bored to at least 1st (.25mm) oversize.

With these sleeves it can safely be taken to 4th (1mm) oversize so this will allow future rebuilds as well.

All gasket sealing surfaces and threads are in excellent shape.

Part #'s that apply 11005-0755, 11005-3768 and 11005-3761

Comes exactly as shown.

Correct for the following models