Unlike current protractor design this protractor does not depend on one's eyesight to make adjustments and unlike current designs this protractor safely protects the stylus during adjustment.
Current protractors depend on aligning the phono cartridge to a printed grid pattern with the stylus placed on the grid. Alignment is subject to discrepancy when the shape of a cartridge body does not conform to the printed grid pattern and errors with unreliable line sight alignment. Also the stylus is unprotected from damage.
Current protractor designs were created when stylus shapes were much simpler and inaccurate alignment more tolerable. Newer stylus shapes require very accurate alignment to work at their full potential.
The Grimm’s protractor utilizes confinement of the phono cartridge body to insure accurate tangency and overhang of the stylus at the calculated null points of the tonearm's arc. Accurate tangency and overhang adjustments are not subject to line of sight errors and the stylus stays protected during adjustment. The protractor can also be used to check azimuth (cartridge physically neutral)..
How to Use
The cartridge is loosely mounted onto the tonearm and the cartridge placed into the protractor. Adjust the cartridge at tonearm so that one of the spindle holes of the protractor can be placed over the turntable spindle. If needed, adjust cartridge so the other protractor spindle hole fits over the turntable spindle. Adjustment is complete when the cartridge requires no adjustment to fit both spindle holes over the spindle.
Important Notes
This protractor is only for the phono cartridges listed above.
Search "Grimm's protractor" for my Shure, Hana, Goldring, Ortofon,, Audio Technica, Denon 301 MKII, Nagaoka & DS Audio protractors.
This protractor is 3D printed using PLA plastic filament.
FITMENT:The GRIMM’s protractor will work with most all pivoting arm turntables. The protractor positions the stylus tangent to the record grooves at the two calculated Baerwald null points regardless of arm length. The Grimm's protractor will only work with the cartridge it is designed to fit.FEEDBACK:Simply Brilliant !! I have installed and aligned cartridges since the late 60's - probably a couple or three thousand. Own a half dozen alignment tools/protractors (maybe a few more than that?). Bought the AT VM-95 and Shure V-15 type gauges -this is not only fast and accurate -but because you can simply hold the cart body into the fixture with your thumb it has no tendency to twist in the headshell as you tighten the mounting bolts.Excellent product. I aligned my cartridge with a protractor and it
always seemed off. This gauge eliminates any guesswork. Very precise.
System sounds better as a result. Great value, pro packaging, fast
shipping, better than described.
Great tool for adjusting a turntable, shipped very fast and secured, seller is an asset to ebay. A++++ |
|
This seller
is very customer friendly I asked many questions and he always responded and
answered all my questions I highly recommend using him fast shipping nice
protractor. These
custom cartridge alignment protractors are simple and easy to use and much
faster than traditional protractors. This tool will be a great help in setting up these Hana cartridges. It is difficult using line of "sight" for setup using many protractors on the market. Thank you!!!! Accurate.
What I liked the most was being able to protect the stylus during
installation. The Hana SL isn't cheap. I don't know why I thought the
protractor would be metal. It's plastic. Nothing wrong with that. It
still works as well as advertised. Fantastic product. Alignment was spot on, huge time saver. Interesting
device. Arrived and tried it out today. Easy to use if you are very
careful and patient. It had me change my alignment by about 1 degree.
Assuming these are made with great precision, better than typical
protractors. Thank you. Very accurate protractor. Fast shipping and well packaged! I'm happy I purchased the quality Item! |