146 with high-gloss lacquer coating
Designer piece - design product - designer product
WITH A FIGHTING WEIGHT OF OVER 9 KG!!!
Our turntables are lovingly put together, modified and assembled by hand.
Each of them is unique and differs in model, color, veneer grain or other details.
The high-quality housings are restored or newly manufactured using qualified craftsmanship.
Electrical components are checked, Moving parts oiled and wearing parts replaced.
A final endurance test rounds off the complex work.
The customer receives a top-class device.
Item description:
Limit switch: Yes
Inner plate: plastic
Bearing mandrel: 8mm
Basic dimensions: Width: 45cm, depth: 36cm, height approx. 18cm
New housing:
The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material.
It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.
New faceplate:
New cover plate made of 1mm aluminum. The surface is anodized in a matt gold color.
New Ortofon OM10 cartridge:
With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.
The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.
New audio cable:
Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.
The turntable:
The turntable is made in five complex and time-consuming steps polished to a high shine.
The high-gloss polish gives your record player a unique look.
With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.
New spikes made of chrome-plated stainless steel:
So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.
Resonances and feedback are thus effectively prevented.
New drive belt:
This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).
New stainless steel record weight:
With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.
Large power supply:
A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.
--------
following Parts are as Accessoriesör erhäliltic and not ingredient this auction:
Hood small (to be placed on the frame): eBay-Item number 112409192591
Hood big (for placing on the substructure): eBay-Item number 112411582098
The following parts are available as accessories and not included in this auction:
Hood small (to put on the housing): German eBay-article number is 112409192591
Hood large (to put on the base): German eBay-article number is 112411582098
Tonearm SME 3009 Series III gold (used, as good as new):
When installing an SME tonearm, the limit switch loses its function.
Cartridge MM systems including installation:
Cartidge MC systems including installation: