Fits BMW E65 E66 7 Series, Spoiler Lip Painted Black Rear Spoiler

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


BMW E65 E66 7 SERIES REAR SPOILER SPOILER LIP PAINTED BLACK

Item description

1 x spoiler rear lip - finished painted (gloss black) for BMW E65 E66 E67 E68 7 Series Sedan 2002 - 2015

With our professionally processed spoilers, which are painted three times after priming, you not only save yourself a lot of nerves, but also a trip to the painter and additional costs for painting, as you can get the finished painted spoilers from us at a price that is barely higher than what you would otherwise pay for painting.

The rear spoiler refines the vehicle with a dynamic finish - subtle and effective. The aerodynamic efficiency and directional stability increase at higher speeds. On the one hand, the rear spoiler emphasizes the dynamic elegance and, on the other hand, emphasizes the sporty look of the car in an individual way. The spoiler can be installed directly.

- Made of robust, flexible polyurethane plastic
- easy assembly, no drilling work
- including high-quality body adhesive tape (3M)
- car wash safe
- the spoiler is delivered in a straight form (for installation it is briefly heated and then adjusted to the curvature of the trunk)

The spoiler comes with a special adhesive strip (3M) so that it can be installed without drilling - simple and stable. Quick and easy installation using 3M adhesive tape, can withstand any car wash (48 hours). after assembly). The PUR / PU (polyurethane) composite material is also extremely light.

The spoiler can be 0.5 - 1 cm shorter overall, but this is completely normal. Because in the production and edge processing of the spoiler there can be a total tolerance of up to 0.5 cm and an additional 0.5 cm tolerance due to temperature deviations.

Installation - Assembly / What you should pay attention to:
1. Before assembly, heat the spoiler until it is flexible (e.g. place it on the heater at level 5 or in the sun for 15 to 30 minutes)
2. Before attaching the spoiler, please make sure that the surface of the trunk is clean and dry

The spoiler is flexible when heated and you can then bend it without worry until it has the curvature of the trunk.
Buy Now Watch article Ask a Question

NOW: TÜV Nord material certificate for all FLY DESIGN spoilers made of ABS and PU material.

  • The TÜV Nord material report confirms that the ABS/PU material of our spoiler has been tested and meets the requirements of applicable regulations. The material has been thoroughly checked for defects or potentially hazardous materials.
  • The test was carried out by: TÜV NORD Mobility GmbH & Co. KG, IFM - Institute for Vehicle Technology and Mobility, Schönscheidtstr. 28, 45307 Essen | IFM - Office, Am TÜV 1, 30519 Hanover
  • The test report was created for ABS material on March 2nd, 2022 and for PU material on May 23rd, 2022. The various tests were carried out based on din 52306.
  • The test covered the following areas: splinter resistance, flammability, edge and surface flames.

Uncomplicated, fast and safe!

Have you found the right product? Then you can order immediately! Uncomplicated, quick and secure in just a few steps.
  • 1. You choose the right product on Ebay.
  • 2. The entire purchase process takes place exclusively via Ebay. There are two payment options available to you: PayPal and advance payment/bank transfer.
  • 3. All paid orders received by us by 2 p.m. will be shipped the same day.
  • 4. You will usually have your product in your hands on the next working day. Delays depending on shipping service providers cannot be ruled out here.

Key Features

ABS spoilers Our ABS spoilers are made from a very stable and solid material. The advantage of the spoiler is clearly the accuracy of the fit and the quality. No further adjustment work is required here. You will receive the spoiler delivered and can install it directly.
PU spoiler Our PU spoilers are made from a flexible material. The spoilers are delivered straight and must be adjusted to the shape of the rear. This is done by heating it (e.g. on a heater or with a heat gun) and bending it to the desired shape.
tape Please do not forget to heat the 3M adhesive strips before installation. This guarantees that the spoiler will not come off.
.
Receive offers conveniently via email
Subscribe to Newsletter
Left
payment

Paypal
Transfer
Credit card

Shipment

contact

Do you have any questions about our offers? Contact us using the eBay contact form.

eBay message
With our professionally processed spoilers, which are painted three times after priming, you not only save yourself a lot of nerves, but also a trip to the painter and additional costs for painting, as you can get the finished painted spoilers from us at a price that is barely higher than what you would otherwise pay for painting. The rear spoiler refines the vehicle with a dynamic finish - subtle and effective. The aerodynamic efficiency and directional stability increase at higher speeds. On the one hand, the rear spoiler emphasizes the dynamic elegance and, on the other hand, emphasizes the sporty look of the car in an individual way. The spoiler can be installed directly. The spoiler comes with a special adhesive strip (3M) so that it can be installed without drilling - simple and