The SL-1200G Master Edition model is the culmination of Technics' extensive development efforts. It incorporates a generous amount of accumulated expertise and technology, including new technologies like "ΔΣ-Drive." The SL-1200G is Technics' first direct-drive turntable since the brand's revival. The SL-1200GME/SL-1210GME are limited-edition models that update the SL-1200G with the latest technology. While retaining key features like the new twin-rotor coreless direct-drive motor, the SL-1200G incorporates a generous amount of new technology and expertise developed over the past decade. These include the "ΔΣ (Delta Sigma)-Drive" that suppresses minute vibrations from motor rotation, the "Multi-Stage Silent Power Supply" that thoroughly reduces noise, and a new coreless direct-drive motor with enhanced rigidity. Furthermore, the SL-1200GR2/SL-1300G also inherits the high-quality design expertise cultivated in its development. These turntables combine the tradition of direct drive with advanced analog record playback technology. The SL-1200GME/SL-1210GME will open up new possibilities for analog record playback.

■Power Supply: AC 100 V, 50/60 Hz

■Power Consumption: 11 W (Power On), 0.2 W (Power Off)

■Dimensions (W x H x D): 453 mm x 173 mm x 372 mm

■Weight: Approximately 18.0 kg

■Operating Temperature: 0°C to 40°C

■Relative Humidity: 35% to 80% RH (Non-condensing)

■Color: SL-1200GME-S (Silver), SL-1210GME-K (Black)

■Output Terminals: 1 x PHONO Terminal, 1 x PHONO Ground Terminal [Turntable]

■Type: Direct-Drive Turntable System (Manual)

■Drive System: Direct Drive

■Drive Motor: Brushless DC Motor

■Turntable: Die-cast aluminum and brass casing, Diameter: 332 mm, Weight: Approximately 3.6 kg (including rubber sheet)

■Rotation Speed: 33 1/3 rpm, 45 rpm, 78* rpm

■ Speed ​​Adjustment Range (Pitch Switching): ±8%, ±16%

■ Starting Torque: 0.32 N・m (3.3 kgf・cm)

■ Starting Response: 0.7 s (at 33 1/3 rpm)

■ Brake Mechanism: Electronic Brake

■ Wow and Flutter: 0.025% W.R.M.S. [Tone Arm]

■ Type: Universal S-shaped Tone Arm, Static Balanced

■ Effective Arm Length: 230 mm

■ Overhang: 15 mm

■ Tracking Error Angle: +2° 32' (Outer circumference of 30 cm (12-inch) record), +0° 32' (Inner circumference of 30 cm (12-inch) record)

■ Offset Angle: 22°

■ Arm Height Adjustment Range: 0-6 mm

■ Stylus Pressure Adjustment Range: 0-4 g (Direct Stylus Pressure Reading)

■ Shell Weight: Approx. 7.6 g

■Applicable Cartridge Weight (without auxiliary weight): 5.6-12.0 g, 3.1-9.5 g (with cartridge spacer), 14.3-20.7 g (with headshell), (with small auxiliary weight): 10.0-16.4 g, 7.5-13.9 g (with cartridge spacer), 18.7-25.1 g (with headshell), (with large auxiliary weight): 14.3-19.8 g, 11.8-17.3 g (with cartridge spacer), 23.0-28.5 g (with headshell)

■Cartridge Mounting Dimensions: JIS standard 12.7 mm (1/2 inch) mounting spacing

■Shell Terminal Lug: 1.2 mm diameter 4-pin terminal lug

■Accessories: Turntable x 1, Turntable Sheet x 1, Dust Cover x 1, EP Record Adapter x 1, Balance Weight x 1, Small and Large Auxiliary Weights (1 each), Shell x 1, Overhang Gauge x 1, Cartridge Mounting Screws (1 set), Turntable Mounting Screws (1 set), Cartridge Spacer x 1, Phono Cable x 1, Phono Ground Wire x 1, Power Cord x 1

■When the rotation speed is set to 78 rpm, the unit is set to rotate at 78.26 rpm.

■Cartridge not included.

Dimensions: W (Width): 453 mm, H (Height): 173 mm, D (Depth): 372 mm

Weight: 18 kg