Fitment tip: eBay “compatibility” can be wrong. Always match your current lever to the photos and the verified fitment table below. If unsure, message us your VIN / reg and a photo of your existing handbrake lever.
Key Details (SEO)
Part type: Handbrake / Parking Brake Lever Assembly
Vehicle generation: Grand Vitara II / JT platform
Colour/trim: Black
Material: Steel mechanism + plastic handle/trim
Condition: Used (may show marks from normal use)
What this part does
The handbrake lever (parking brake handle) mechanically pulls the parking brake cables to hold the vehicle stationary when parked. It also operates the parking brake warning switch in the console area.
Common fault symptoms
Handbrake won’t hold on a hill / excessive lever travel
Console area creaks or lever feels loose (worn pivot/bushings)
Why replace with an original manufacturer part?
Better fit, stronger metalwork, and correct geometry vs many low-cost copies. Used parts can often save 30–70% compared to buying new, depending on the component.
Verified Fitment (Exact Years — No Guessing)
The fitment below is based on model/chassis listings for Suzuki Grand Vitara II (JT, TE, TD) covering both 3-door and 5-door bodystyles.
Make / Model
Chassis / Generation
Body
Years
Notes
Suzuki Grand Vitara II
JT / TE / TD
3-door
2005–2015
Verified application listing includes 3-door models in this year range.
Suzuki Grand Vitara II
JT / TE / TD
5-door*
2005–2015
*Often listed as “4 doors” + tailgate. Verified application listing includes this bodystyle in this year range.
RHD vs LHD: Some lever assemblies differ by steering position. UK vehicles are typically RHD. Always compare your current lever with our photos and check the part-number section below.
Will NOT Fit (Common Mistakes)
Vitara (LY) 2015+ (different generation/platform)
Earlier Grand Vitara / Vitara generations that are not JT/TE/TD
Non-matching lever shape / console trim / cable attachment style (compare photos)
If your lever/trim/cable connection doesn’t match the photos, this isn’t the correct part.
Buy the Correct Part First Time ✅
Confirm model: Suzuki Grand Vitara II (JT/TE/TD)
Confirm years: 2005–2015
Confirm body: 3-door or 5-door
Confirm steering: RHD vs LHD
Match photos: handle shape + bracket + mechanism
Still unsure? Message us your VIN/reg + photo — we’ll verify fitment.
Important: Please ensure your checkout address is correct. Once an order is placed, we may not be able to amend address details.
Where This Part Fits (Reference Photos)
The handbrake lever sits in the centre console between the front seats.
Handbrake lever location (centre console)
Reference Photo A – interior view (handbrake area highlighted)
Handbrake lever location (between seats)
Reference Photo B – alternate interior angle (handbrake area highlighted)
Vehicle Examples (Correct Bodystyle Photos)
This part is verified for the JT/TE/TD Grand Vitara II range in both bodystyles shown below.
3-door example (Grand Vitara II)
5-door example (Grand Vitara II)
Part Numbers & Cross-Reference (Match Before You Buy)
Not all listings show part numbers. If your existing unit matches one of the numbers below, it strongly confirms compatibility.
Type
Number
Notes
RHD lever assy
54100-65J00-5PK
Right-hand-drive specification (common listing for this lever family).
LHD lever assy
54100-65J10-5PK
Left-hand-drive specification (check before ordering if not UK/RHD).
Lever assy (black)
54100-65J12-5PK
Listed variant for this lever assembly family (colour/trim dependent).
Other references seen
5410065J10 / 5410065J105PK
Reference formats used on catalog/parts sites (always match photos + steering side).
Also known as: Suzuki Escudo / Grand Nomade in some markets (same JT platform). Verify by part number and photos.
Fitting Instructions (DIY Guide)
Required tools
Trim removal tools (plastic pry tools)
Socket set + ratchet (commonly 10mm/12mm)
Phillips screwdriver
Needle-nose pliers (for cable clips/pins)
Torque wrench (recommended)
Work light + gloves
Estimated repair time
DIY: ~45–90 minutes Garage: ~0.8–1.2 labour hours (varies by trim & condition)
Always follow the official service manual for your exact vehicle where possible.
Step-by-step (general guidance)
Park on level ground, engage gear/Park, and chock wheels. Disconnect battery if working near wiring.
Carefully remove centre console trim around the handbrake (use trim tools to avoid marks).
Disconnect the parking brake warning switch connector (if fitted).
Slacken the cable adjuster (if accessible) and release parking brake cables from the lever mechanism.
Remove lever mounting bolts and lift out the handbrake lever assembly.
Install the replacement lever assembly, refit bolts, and reconnect cables.
Adjust cable tension so the lever travel is correct and the vehicle holds securely.
Reconnect switch wiring, refit trim, and test: hold on incline + warning light operation.
Safety note (read)
Incorrect parking brake adjustment can cause poor holding force or dragging brakes. If you’re not confident, use a qualified technician.
Garage Cost Estimator (£/hour) — No scripts
Use the table below for a quick estimate. Multiply your local labour rate by the estimated hours.
Estimated labour time used here: 1.0 hour Example formula:£/hr × hours = labour cost
Labour Rate
Hours
Estimated Labour Cost
£50/hr
1.0
£50
£65/hr
1.0
£65
£80/hr
1.0
£80
£100/hr
1.0
£100
£120/hr
1.0
£120
Fitting service available (subject to availability). Message us on eBay to book a slot.
Stock on the Shelf
25,000+ parts in stock and ready to dispatch.
Warehouse stock (example image)
Repairs & Workshop Support
We can also carry out repairs (subject to availability).
Mechanic/workshop (stock photo)
Dispatch & Worldwide Postage
Worldwide postage: We ship internationally via eBay Global Shipping Program (GSP) where available. Eligible destinations are shown automatically at checkout.
Fast handling: Packed securely to protect the mechanism in transit.
Tip: if you want us to confirm compatibility before dispatch, send your VIN/reg and a clear photo of your existing handbrake lever.
Boxed items ready for dispatch (stock photo)
Collection (7 Days a Week • Till 8PM)
Collection by appointment (including bank holidays by prior appointment).
Find us:
ThePartPilot Unit 8–11 (located after Bee Kwik Scaffolding)
Ivanhoe Business Park, Wortley Road (sometimes shown as Wortley Road for this postcode)
Rotherham, S61 1LZ
Scan the QR code for directions.
Scan for directions
Fitment Support & Returns (Minimise Mistakes)
Fitment checks available: message your VIN/reg + photo and we’ll help confirm compatibility.
Ordered wrong / doesn’t fit: if fitment was clearly provided and the part is returned as supplied, a restocking/handling deduction may apply (in line with eBay policy and return reason).
Faulty or misdescribed: handled under standard eBay returns rules.
Best practice: Always verify fitment using the photos and the verified fitment table above — not only the item specifics.
We Also Buy Cars for Cash 🚗💷
Nationwide collection • Same day payment • Quick, straightforward process.
Message us on eBay to discuss.
Thank You for Supporting a Local Business ❤️♻️
Every order helps a UK small business keep quality parts in circulation. Choosing used parts reduces waste, keeps vehicles on the road for longer, and helps the planet by reusing perfectly serviceable components. 🌍🔧