Adjustable Desk Mount clamp for winctrl URSA MINOR 32 Throttle. This adjustable clamp allows you to attach to your desk with no damage and can be adjusted to desired hight. The controller can be permanently attached to the plate using the holes provided (bolts not included) This will come with a straight clamp but can be produced in a angled clamp like the pictures if need for your setup please specify if this is required and what direction when ordering. The clamp will fit a desk thickness of up to 30mm. If needed you can adjust the controller in the downward direction by up to 150mm from desk hight. Item dimensions are 375 x 130 x 200mm. This item will be 3d printed and supplied in black. If you are not aware of the 3d printing process the item will show small layer lines on the surface and may show small imperfections but this will not affect the structural integrity of the item. Thanks for viewing any questions I will try my best to answer. Please be aware this if for the table mount only controller not included