ThePartCaptain
Premium used vehicle parts • 25,000+ parts in stock
✓ No VAT charged (Margin Scheme)
🌍 Worldwide delivery (eBay GSP)
🕗 Collection 7 days • till 8PM (appt)
Fiat Doblò Mk1 (Type 223A/119) 1.3 Multijet Diesel Intercooler
Factory-spec used intercooler / charge air cooler for turbo diesel intake cooling (front-mounted).
Verified part numbers from label/photos: 517189530 1686856 220320060430 ALD3745 (listing ref)
Verified part numbers from label/photos: 517189530 1686856 220320060430 ALD3745 (listing ref)
Tip: Always match part number + pipe orientation to the photos to avoid wrong orders.
If you’re unsure, message us a photo of your old part label + your reg/VIN and we’ll help confirm.
Quick Facts
Part Type
Intercooler
Charge air cooler (turbo diesel)
Condition
Used
Cosmetic wear may be present (see photos)
Main Part No.
517189530
Also seen: 1686856 / 220320060430
Core Size (ref)
500 × 67 × 85 mm
Core height / width / thickness
Typical Material
Alu + plastic
Aluminium core & plastic end tanks (as pictured)
What it controls
Intake air temp
Cools compressed turbo air before the engine
Address check: Please ensure your checkout address is correct — we ship to the address supplied at checkout.
Note: this is a used factory-spec part. Buying used can save you up to 70% versus new for many vehicle parts, while keeping original fit & function.
Where this part fits (reference photos)
The intercooler sits at the front of the vehicle in the cooling pack area (behind the lower bumper / grille), connected between the turbo pipework and intake system.
Reference Photo #1 (from this listing)
Shows the intercooler positioned in the front-end cooling stack area.
Reference Photo #2 (vehicle example)
Fiat Doblò Mk1 example
Vehicle image is for location guidance so you can visualise where the intercooler sits behind the front bumper area.
Correct vehicle body examples
Important: Your vehicle must match the confirmed fitment table below (and your old part number/shape should match the photos).
Confirmed compatibility (exact fitment)
These fitments are tied to part number 517189530 (and associated references). If your vehicle differs, please compare your old part number and the pipe orientation in the photos.
| Make / Model | Generation / Code | Body | Engine | Power | Years (from → to) |
|---|---|---|---|---|---|
| Fiat Doblò | Mk1 • Type 223A/119 | MPV | 1.3 JTD 16V Multijet (1,248cc) • Engine code 199A2000 | 55kW (75hp) | 2005-05 → 2010-12 |
| Fiat Doblò Cargo | Mk1 • Type 223 | Delivery / Van | 1.3 D 16V Multijet (1,248cc) • Engine code 199A2000 | 55kW (75hp) | 2005-10 → 2010-01 |
Fitment check (best practice):
match your old intercooler’s part number and hose outlet positions to the photos above.
If you message us a photo of your old label + your reg/VIN, we can help confirm before you order.
Also seen on (same part number) — verify before purchase
These models have been listed against part number 517189530 on catalog sources. Only proceed if your old part number/shape matches.
| Model | Engine | Years (from → to) |
|---|---|---|
| Fiat Fiorino (225) | 1.3 JTD 16V Multijet (199A2000 / 199A9000 variants) | 2007-11/12 → 2010-10 (varies by version) |
| Fiat Grande Punto (199) | 1.3 JTD Multijet 16V | 2005-10 → 2013-06 |
| Fiat Punto Evo (199) | 1.3 JTD Multijet Start&Stop 16V (199A2000 / 199A9000 variants) | 2009-03/10 → 2012-02 |
| Fiat Qubo | 1.3 D 16V Multijet | 2008-02 (listed) |
| Lancia Ypsilon (843) | 1.3 JTD 16V Multijet | 2006-09 → 2011-12 |
Not sure? Send photos of your current intercooler (front + hose ends) and the label/part number — we’ll help.
Will NOT fit (common mistakes)
| Not suitable for | Why | How to avoid a wrong order |
|---|---|---|
| Fiat Doblò Mk2 / Type 263 (2010-on) | Different cooling pack and intercooler variants | Check your vehicle generation and match part numbers & hose layout to photos |
| Non-turbo engines / petrol variants | Intercooler is used on turbocharged setups | Confirm you have an intercooler fitted and match old part number |
| Any vehicle where the existing part number is NOT 517189530 / 1686856 (or the hose ends differ) | Pipe orientation, brackets, or core dimensions may be different | Use the label photo + your old part comparison before ordering |
Returns note: If a return is opened due to incorrect fitment after the compatibility details above were provided and/or fitment help was offered,
a restocking/handling deduction of up to 50% may be applied where permitted.
Symptoms of a failing intercooler (why replacement matters)
- Loss of power / sluggish acceleration (boost leaks reduce air delivery)
- Hissing / whistling under load (air leak from core or pipe joints)
- Excess smoke (incorrect air/fuel ratio due to lost boost)
- Higher intake temps / reduced efficiency (heat-soaked or blocked core)
- Oil mist / residue around hoses or intercooler (often seen with boost leaks)
Keeping a factory-spec intercooler helps maintain correct boost performance, cooling efficiency, and reduces the risk of running hot under load.
Low-cost pattern parts can suffer from poorer fitment and weaker end tanks/cores — leading to repeat labour.
Fitting instructions (overview)
Estimated repair time: typically 1.5 to 3.0 hours depending on corrosion, trim clips and access (professional workshop may be faster).
Tools you’ll need
- Socket set (commonly 8mm–13mm) + ratchet & extensions
- Torx bits / screwdrivers (for bumper/undertray fixings)
- Trim clip removal tool or flat screwdriver
- Pliers for hose clips
- Jack + axle stands (or a ramp) and wheel chocks
- Gloves, eye protection, penetrating fluid (for rusty fasteners)
Step-by-step (general)
- Let the engine cool. Disconnect battery negative if working near fans/loom.
- Remove undertray and front bumper fixings (access varies by trim).
- Locate intercooler in the front cooling pack. Photograph hose routing before removal.
- Release boost hoses and clamps. Inspect hoses for splits (common cause of leaks).
- Unbolt intercooler brackets/mounts. Carefully lift out to avoid bending fins.
- Fit replacement intercooler, ensuring correct seating on mounts and no rubbing.
- Reconnect hoses; tighten clamps evenly. Refit bumper/undertray.
- Start engine, check for leaks (listen for hissing), and road-test under light load.
This is a general guide. Always follow manufacturer service info for your exact model/trim.
Garage labour cost estimator (no scripts)
Use this quick chart to estimate labour: Cost = Hours × £/hr (parts not included).
| Estimated hours | £60/hr | £80/hr | £100/hr | £120/hr |
|---|---|---|---|---|
| 1.5 hrs | £90 | £120 | £150 | £180 |
| 2.0 hrs | £120 | £160 | £200 | £240 |
| 2.5 hrs | £150 | £200 | £250 | £300 |
| 3.0 hrs | £180 | £240 | £300 | £360 |
We also offer a fitting service (subject to availability). Message us to check booking slots and labour pricing.
Worldwide delivery (eBay Global Shipping Programme)
We ship worldwide via eBay GSP where available. Import charges/collection are handled through eBay’s programme at checkout.
GSP eligible destinations (from the UK)
EU Countries
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
Non‑EU Countries
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA, Vietnam
If your country does not appear at checkout, it’s not currently eligible for this item via the programme.
On the shelf & ready to dispatch
25,000+ parts in stock at any time — fast packing, careful handling, and secure dispatch.
Warehouse stock (illustration)
Dispatch packing (illustration)
Workshop support (repairs available)
We can also carry out repairs and fitting (subject to availability). Ask for a quote.
Need help? Message us with your vehicle details and what symptoms you’re seeing — we’ll point you in the right direction.
Collection / How to find us
Collection available 7 days a week till 8PM by appointment (including bank holidays by prior appointment).
ThePartCaptain — Unit 8–11
(located after Bee Kwik Scaffolding)
Ivanhoe Business Park, Wortley Road (sometimes shown as Wortley Road for this postcode)
Rotherham, S61 1LZ
Scan the QR code to save the address / open in maps.