25LED-D4 is installed in-line with matching 4-pin connectors of the high-mount LED and trunk light harness. It is designed for the factory high-mount tail bar.

All that's required is to unplug the connectors and insert the matching plugs of the 25LED-D4 tailBlazer.

Motorcycle Safety Foundation (MSF) suggests that you pump your brakes at each stop. tailBlazer does it automatically, and by flashing the tail light at maximum brightness.

When you apply the brakes the brake light will modulate rapidly at first then slow down to a solid ON over a period of (4) seconds.

WHAT DO THEY SEE?

This is a DUAL-FUNCTION tailBlazer, so the High-mount LEDs will remain lit at reduced intensity until you apply the brakes. As soon as you tap your brakes, drivers behind you will see a rapid flash of the brake lights. This sudden flashing commands immediate attention of vehicles behind you.

WHAT WILL THEY THINK?

tailBlazer uses a flash pattern which decays exponentially - a well-recognized deceleration warning. The attention to the initial flashing now changes to a clear recognition that you're beginning to slow down!

Simply flashing brake lights or flashing them on & off will get the attention of drivers behind you, but it doesn't invoke anything else. Every split second of delay in their reaction reduces your safety margin.

The internal circuitry is controlled by a microprocessor, which allows precise flash patterns, overload detection and reverse polarity protection.

Installation videos with standard bulbs and LED bulbs are viewable on Kisan's YouTube channel. Or you can search for them directly on YouTube.