Welcome to our store!


To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order.


 


Fitment
2005-2010,2012-2013,2016 For Nissan Frontier

 

Key Features

Package Includes:

 

Includes Easy-to-Follow Installation Guide

For DIY users who are familiar with basic car maintenance, you can follow the general steps below to replace the sensor. Please note that these are general guidelines and the specific process can vary by vehicle. We always recommend consulting a professional mechanic if you are unsure.

General Installation Steps:

  1. Safety First: Park your vehicle on a flat, solid surface, engage the parking brake, and disconnect the negative battery terminal to prevent any electrical shorts.

  2. Lift the Vehicle: Use a jack to safely lift the vehicle and securely place jack stands under the frame near the wheel where you will be working. Never work under a vehicle supported only by a jack.

  3. Locate the Sensor: Find the faulty ABS sensor. It is usually located on the wheel hub assembly or steering knuckle near each wheel.

  4. Disconnect the Electrical Connector: Locate the sensor's electrical connector. Press the locking tab and carefully unplug it.

  5. Remove the Old Sensor: There is typically a single mounting bolt holding the sensor in place. Use the appropriate wrench or socket to remove it. The sensor might be corroded and stuck in place, so you may need to wiggle it carefully to pull it out.

  6. Install the New Sensor: Clean the mounting hole of any dirt or corrosion. Insert our new sensor into place. Reinstall the mounting bolt and tighten it to the proper torque (if known).

  7. Reconnect the Electrical Connector: Plug the electrical connector back into the new sensor until you hear a "click" indicating it is locked in.

  8. Reconnect Battery and Test: Reconnect the negative battery terminal. Start the engine and observe the dashboard; the ABS warning light should turn off after a few seconds. Take the car for a low-speed test drive in a safe area to ensure the brakes function normally and the ABS light does not come back on.

Important Note: If you are unsure about any of these steps, we highly recommend consulting your vehicle's service manual or having the installation performed by a qualified professional mechanic. Incorrect installation can lead to ABS system failure.

 

Notice

Please check your vehicle compatibility before buying.
Please check your old number and pictures before buying
Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation.


Item Specifics
UPC Does not apply
Brand VaultPro
Manufacturer Part Number 13485348
Placement on Vehicle Left Right Rear
Manufacturer Warranty 1 Year
Interchange Part Number 479019CA5A, 479009CA5A,
Superseded Part Number ALS618 ALS626
width 12 cm
Color black
weight 1 Lb
Fitment Type Direct Replacement
Height 10cm
Material Plastic
Surface Finish Polished, Rust Protected
Sensor Type ABS Speed Sensor
Universal Fitment No
Number of Sensors 2


About Us:

We are committed to making the best auto-parts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.

 

Payment:

Any payment can be accepted by ebay.

 

Shipping:

2-8 working days in transit.

Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.

 

Returns:

30-day free return provided.

 

Contact Us:

Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.