iShoot Lens Collar Tripod Mount Ring IS-S24240FE
Compatible with Sigma 20-200mm F3.5-6.3 DG C E-mount Lens and so on
Bottom is 39mm ARCA Fit Quick Release Plate Feature
Compatible with ARCA-SWISS Fit Tripod Head Clamp & Arca Fit Stabilizer
Features:
1. The lens collar is made according to the shape and structure design of the lens, installed near the lens mount; Does not support mounting a camera cage or vertical shooting plate on the camera, as it may cause collisions;

2. The contact surface between the inner wall of the tripod ring and the lens is with PVC film to reduce wear; there should be no stickers at the installation position, if there is, it should be removed, otherwise it will affect the installation;

3. When installing, loosen the knob, align the convex point of the lens with the groove of the ring body, push down gently, and make sure the lens mount is flush with the tripod ring before tightening, then lock it moderately; the tripod ring does not support rotation, it can only be used for horizontal shooting, not vertical shooting;

4. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, can be used with 39mm Arca-Swiss fit tripod head and clamp directly, more practical than lens collars without QR-Plate; also reserved a QD hole, 1/4" & 3/8" screw holes stainless-steel anti-slip screws for fixing lens to tripod directly；

5. The bottom of the plate is improved with new design, which is also compatible with the handheld stabilizer with the same structure of Arca-Swiss;

6. The lens collar IS-S24240FE can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for fluid heads with Manfrotto structure;

7. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
Compatible with Sigma Lens:
17-40mm F1.8 DC Art X-mount
17-40mm F1.8 DC Art E-mount
14-24mm F2.8 DG DN Art E-mount
20-200mm F3.5-6.3 DG C E-mount
24-70mm F2.8 DG DN Art E-mount
24-70mm F2.8 DG DN Art II E-mount
28-45mm F1.8 DG DN Art E-mount
28-70mm F2.8 DG DN C E-mount
85mm F1.4 DG DN Art E-mount
105mm F2.8 DG DN Macro E-mount
(Not compatible with Sigma 28-70mm f/2.8 DG DN Art)
Cannot be used with L-mount lens, please don't buy it if your lens in not in the use range.
Package Including:
1 x iShoot Tripod Mount Ring IS-S24240FE
(The other items in the photos not listed here are for illustrating only, not included)

iShoot Quick Release Plate Converter Clamp Adapter IS-3950PRO
for Converting RRS / ARCA Fit Quick Release Plate
to Manfrotto / Sachtler Fit Fluid Head
Features:
1. The quick-release plate converter adopts a one-way design, about 75mm in length, about 50mm in width, about 15mm in thickness, about 35g in net weight; compatible with quick release plate of maximum width of about 39mm and other products of the same specification;

2. Compatible with fluid heads with 50mm quick release plate without T, include Manfrotto MVH500 and MVH700 series, 500/501/502/577/701 series, Sachtler ACE XL/FSB 4/FSB 6/FSB 8, etc., and other fluid head with the same structure;

3. Twist the 1/4 stainless-steel screw into the converter to fix the quick release plate. The built-in chute of the converter is about 55mm long, and sliding the bottom plate can change the center of gravity of the lens;

4. The clamp adapter is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
Package Including:
1 x iShoot Quick Release Plate Converter Clamp Adapter IS-3950PRO
(The other items in the photos not listed here are for illustrating only, not included)

Round Ultra-thin Quick Release Plate Clamp IS-JZ64II-YX
Compatible with RRS / Arca-Swiss Fit Quick Release Plate and Ball Head
Main features:
1. This IS-JZ64II-YX need to be purchased separately, not included in the tripod mount ring; it can be used with iShoot tripod mount ring of the listing;

2. Improved second-generation clamp, made of aviation Aluminum material, CNC finely machined, surface oxidation treatment, round ultra-thin design; size without knob is around 64 x 15.5mm; coaxial knob to adjust clamp opening and closing; knob rod length is around 46mm; net weight around 115g;

3. Clamp with precision scale, built-in spirit level, with 3/8" screw hole,
designed with two symmetrical 14 x 6.5mm hollowed function extension slots;

4. With Arca standard fit, cross slot design, compatible with ARCA-SWISS, KIRK, Wimberley, MARKINS, SUNWAYFOTO, kangrinpoche, BENRO, SIRUI quick release plate and ball head of Arca fit; can be used with iShoot panning head IS-QJ64II and quick release plate QS-60/QS-70/QS-80.
Package Including:
1 x Round Ultra-thin Quick Release Plate Clamp IS-JZ64II-YX
(The other items in the photos not listed here are for illustrating only, not included)