eBay

Autel MaxiFlash VCMI

VCI Connection (Wi-Fi / BT / USB) Support Dual Wireless Mode, the new host and communication box are connected through Wi-Fi, Wi-Fi communication transmission speed is fastermore stablestrong anti-interference ability, the actual test wireless distance is more than 50m, and the diagnosis speed is more than 30% faster. Oscilloscope VCMI integrated oscilloscope, through 4 major technologies: Large Bandwidth, High Sampling Rate, Deep Storage, Massive Preset Cases, supports 2 major features: Zoom & Playback, Advanced Triggering, improving the efficiency of solving complex faults. Waveform Generator Supports multiple signal modes, including DC voltage, square wave, square wave (X+Y), triangle wave, actuator drive and arbitrary waveform. Simulate the signals of various sensors and ECU modules, you can intuitively judge whether it is a hardware problem without changing parts. CAN BUS CHECK By detecting the signal of the OBD interface, you can quickly determine whether the communication status is normal. If the signal is normal, the indicator light will flash; if there is no signal, make sure the pins are set correctly. Multimeter The Multimeter is mainly used to measure voltage, current, resistance, frequency, diode, duty cycle, pulse width and connectivity. Note This VCMI package does not come with any other accessories, only applicable to damage or replacement of your original VCMI. If you want to use it with other tablets, you need to purchase the accessories by yourself, and functions may be limited, please purchase carefully.

5-in-1 VCMI, Diagnose & Program Vehicles More Efficiently

Except working as a diagnostic tool, it also functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester.

More Advanced than J2534: With the 3 diagnostic protocols (D-PDU/SAE J2534/RP1210), Ultra can work with more OEM diagnostic tools and diagnose & program more vehicles than J2534 programming tools.

1). New Combination Vehicle Communication and Measurement Interface

D-PDU / J2534 / RP1210 Diagnostic Protocols Cover More Vehicle Types
DoIP / CAN FD Protocols for High-Speed CAN Cover New Vehicle Models
NEW Oscilloscope - Faster Bandwidth 20MHz / Sample Rate 80MS/s
Higher 12-Bit Resolution / Larger Memory 32Mil Samples

2). Affordable Test Component Combination for Repair Confirmation

Combined Signal Detection and Signal Stimulation
OBDII Channel Detection / DLC Pin Location and Direct Measurement
Protocol CAN Testing / Advanced Triggering / Auto-Scale Zooming

3). Easier Operation of Built-In Preset Guided Tests for Faster Operation

Custom Probe Specification & Reference Waveform Libraries
Saved Test Configurations / Component Tests / Data Graphs

AUTEL MaxiFlash VCMI

AUTEL VCMI 4-channel Oscilloscope

AUTEL VCMI 4-channel oscilloscope as one of its components. It is designed specifically for use in automotive diagnostics and repair, and is capable of capturing and analyzing complex signals in real-time.

The VCMI 4-channel oscilloscope component of the system offers a range of features and capabilities that are tailored to automotive diagnostics. It has a high sampling rate and bandwidth, allowing it to accurately capture fast-changing signals and waveform shapes. It also comes with a range of preset automotive waveform templates, making it easy to diagnose specific vehicle issues such as misfires, fuel delivery problems, and ignition faults.

The AUTEL VCMI 4-channel oscilloscope also has a user-friendly interface and is compatible with a range of mobile devices and operating systems. This allows technicians to easily capture and analyze data, and to share their findings with other members of their team or with customers.

AUTEL MaxiFlash VCMI

AUTEL VCMI Waveform Generator

The AUTEL VCMI system that provides a range of waveform generation capabilities. It is designed to work in conjunction with the VCMI 4-channel oscilloscope and other diagnostic tools to help automotive technicians diagnose and repair vehicle issues.

The waveform generator component of the system can generate a range of common automotive waveforms, such as sine waves, square waves, and pulse waves. It can also generate more complex waveforms, such as those that simulate sensor signals or ignition waveforms.

One of the key features of the AUTEL VCMI Waveform Generator is its ability to synchronize with the VCMI 4-channel oscilloscope. This allows technicians to generate a specific waveform and then immediately capture and analyze it on the oscilloscope. This can be particularly useful for diagnosing issues with specific vehicle components or systems, such as sensors or ignition systems.

The AUTEL VCMI Waveform Generator also has a user-friendly interface that allows technicians to easily create and customize waveforms. It can be controlled using a mobile device or a computer, and is compatible with a range of operating systems.

AUTEL MaxiFlash VCMI

AUTEL VCMI CAN BUS Check

The AUTEL VCMI CAN BUS Check is a diagnostic tool that is designed to help automotive technicians diagnose and repair issues with a vehicle's CAN (Controller Area Network) bus. The CAN bus is a critical component of modern vehicles that allows various electronic systems to communicate with each other.

The VCMI CAN BUS Check component of the AUTEL VCMI system allows technicians to quickly and accurately diagnose issues with the CAN bus. It can read and analyze data from the bus in real-time, and can identify any faults or issues that may be causing communication problems between different systems.

The AUTEL VCMI CAN BUS Check also includes a range of diagnostic tools and features, such as CAN bus decoding and graphing, which can help technicians gain deeper insights into the data being transmitted on the bus. It also has a user-friendly interface that makes it easy to use and understand.

The VCMI CAN BUS Check is compatible with a range of different CAN bus protocols and can be used with various types of vehicles. This makes it a versatile tool that can be used by technicians in a range of different automotive settings.

AUTEL MaxiFlash VCMI

AUTEL VCMI Multimeter

The AUTEL VCMI Multimeter is a diagnostic tool that is designed to measure a range of electrical parameters in automotive systems. It is a component of the AUTEL VCMI system, which includes a range of diagnostic tools that are specifically designed for use in the automotive industry.

The VCMI Multimeter can measure a range of electrical parameters, including voltage, current, resistance, capacitance, and frequency. It is designed to be used in conjunction with the VCMI 4-channel oscilloscope and other diagnostic tools, allowing technicians to quickly and accurately diagnose issues with a vehicle's electrical systems.

One of the key features of the AUTEL VCMI Multimeter is its ability to synchronize with the VCMI 4-channel oscilloscope. This allows technicians to measure electrical parameters and immediately capture and analyze them on the oscilloscope. This can be particularly useful for diagnosing issues with specific components or systems, such as alternators, batteries, or sensors.

The AUTEL VCMI Multimeter also has a range of diagnostic functions and features, such as diode and continuity testing, which can help technicians quickly identify issues with electrical components. It also has a user-friendly interface that makes it easy to use and understand.

AUTEL MaxiFlash VCMI

Buttons and Ports

（1）Vehicle LED________________（7）Ethernet Port _______________________（13）Multimeter Jacks

（2）Oscilloscope LED___________（8）Vehicle Data Connector (DB26-Pin) ____（14）USB Port

（3）Multimeter LED____________（9）Input Channel A _____________________（15）Hook

（4）Waveform Generator LED__（10）Input Channel B _____________________（16）DC Power Supply Input Port

（5）Battery LED ______________（11）Input Channel C _____________________（17）Power Button

（6）Power LED _______________（12）Input Channel D