Popular
Product Introduction
Features
1.Support 5V and 12V dual voltage output, to meet the power needs of a variety of electronic devices.
2. No welding DIY design, easy to install, suitable for electronic enthusiasts to quickly assemble.
3.Can be assembled with 3 sections of 18650 batteries, providing high capacity and stable endurance.
4. Equipped with a power switch, easy to control the power supply state, enhance the safety of use.
5.Standard DC5.5*2.1mm interface, widely compatible with all kinds of adapters and equipment systems.
Parameter
Capacity: loadable battery capacity: 3*3.7V*3400mah=37 watt-hours (batteries user-provided)
Output power: DC port output 12V3A (not regulated); USB port regulated output 5V2-3A
Whether regulated: DC port is not regulated, 3 batteries connected in series for direct output, full of 12.6V low-voltage protection of 8V, the voltage increases or decreases with the amount of power
Application Type: For small power appliances that do not require voltage regulation, electric motors, LED lights, stereos, solenoid valves, radios, etc.
Battery type: 3.7V cylindrical 18650 batteries
Charger type: 12-13V charging, with internal charging current circuit, more than 13V may be damaged, less than 12.7V may be charging the full
Charging power: internal charging current limiting circuit with 12.6V0.4A=5W Charging power: internal charging current limiting circuit 12.6V0.4A=5W, can be charged by ordinary 12V power supply
Protection circuit parameters: overcharge protection 4.25V*3; low voltage protection 2.75V*3; overcurrent detection voltage 0.1V+-0.025V Temperature range of use: -20~60℃
DC interface standard: DC5.5*2.1mm (inside positive and outside negative)
Package include
Battery box*2
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Product Introduction
Features
1.Support 5V and 12V dual voltage output, to meet the power needs of a variety of electronic devices.
2. No welding DIY design, easy to install, suitable for electronic enthusiasts to quickly assemble.
3.Can be assembled with 3 sections of 18650 batteries, providing high capacity and stable endurance.
4. Equipped with a power switch, easy to control the power supply state, enhance the safety of use.
5.Standard DC5.5*2.1mm interface, widely compatible with all kinds of adapters and equipment systems.
Parameter
Capacity: loadable battery capacity: 3*3.7V*3400mah=37 watt-hours (batteries user-provided)
Output power: DC port output 12V3A (not regulated); USB port regulated output 5V2-3A
Whether regulated: DC port is not regulated, 3 batteries connected in series for direct output, full of 12.6V low-voltage protection of 8V, the voltage increases or decreases with the amount of power
Application Type: For small power appliances that do not require voltage regulation, electric motors, LED lights, stereos, solenoid valves, radios, etc.
Battery type: 3.7V cylindrical 18650 batteries
Charger type: 12-13V charging, with internal charging current circuit, more than 13V may be damaged, less than 12.7V may be charging the full
Charging power: internal charging current limiting circuit with 12.6V0.4A=5W Charging power: internal charging current limiting circuit 12.6V0.4A=5W, can be charged by ordinary 12V power supply
Protection circuit parameters: overcharge protection 4.25V*3; low voltage protection 2.75V*3; overcurrent detection voltage 0.1V+-0.025V Temperature range of use: -20~60℃
DC interface standard: DC5.5*2.1mm (inside positive and outside negative)
Package include
Battery box*2
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.