• Specification:
  • Item:MSP675   Pickup Length:3.125"    
  • Thread Length:2.75"      
  • Lead Length:7.00"       
  • Thread Size 5/8-18:UNF-2A           
  • Drill Size:37/64 
  •  
  • Description:
  • The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine.
  • The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and 
  • centered over the ring gear teeth. A spot face should be present to provide a flat surface on which to anchor 
  • Welcome to our store

    Wish you a happy shopping

    MSP675 UNF-2A Magnetic Rotate Speed Sensor Pick Up Sender Ring GearTeeth New

    Specification:

    Item:MSP675  
    Pickup Length:3.125"    

    Thread Length:2.75"      

    Lead Length:7.00"       

    Thread Size 5/8-18:UNF-2A           

    Drill Size:37/64 

     

    Description:

    The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine.

    The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and 

    centered over the ring gear teeth. A spot face should be present to provide a flat surface on which to anchor 

    the locknut.With the engine stopped, screw the speed senor in until it touches a gear tooth, then back it out 3/4 

    of a turn and secure it with the locknut. Any ferrous gear may be used as long as the frequency and amplitude 

    of the resulting signal meet the speed control unit specifications

    The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.

    The leads may need shielding if they are longer than 10 ft. (3m), or if external interference is present.

    Do not connect either of the speed sensor leads to anything but the speed control unit used.

    The shield should not be connected at the speed sensor end.

     

    Package List:

    MSP675 Magnetic Rotate Speed Sensor Pick Up Sender Ring Gear Teeth UNF-2A


    Item Specifics
    Brand JOPOW
    MPN TL977574
    Type Generator Carburetor
    Thread Length 2.75"
    Lead Length 7.00"
    Thread Size 5/8-18 UNF-2A
    Drill Size 37/64
    Pickup Length 3.125"
    Warranty 1 year

    Payment

    We support multiple payment methods.

    Shipping

    Please contact us if you have special requirements (combination of packaging etc.).

    Returns
    Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.
     
    Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.
     
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    Contact Us

    Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.

    We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.

    Welcome to our store

    Wish you a happy shopping

    Shop Category
    MSP675 UNF-2A Magnetic Rotate Speed Sensor Pick Up Sender Ring GearTeeth New

    Specification:

    Item:MSP675  
    Pickup Length:3.125"    

    Thread Length:2.75"      

    Lead Length:7.00"       

    Thread Size 5/8-18:UNF-2A           

    Drill Size:37/64 

     

    Description:

    The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine.

    The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and 

    centered over the ring gear teeth. A spot face should be present to provide a flat surface on which to anchor 

    the locknut.With the engine stopped, screw the speed senor in until it touches a gear tooth, then back it out 3/4 

    of a turn and secure it with the locknut. Any ferrous gear may be used as long as the frequency and amplitude 

    of the resulting signal meet the speed control unit specifications

    The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.

    The leads may need shielding if they are longer than 10 ft. (3m), or if external interference is present.

    Do not connect either of the speed sensor leads to anything but the speed control unit used.

    The shield should not be connected at the speed sensor end.

     

    Package List:

    MSP675 Magnetic Rotate Speed Sensor Pick Up Sender Ring Gear Teeth UNF-2A



    We support multiple payment methods.

    Please contact us if you have special requirements (combination of packaging etc.).

    Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.
     
    Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.
     
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.

    Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.

    We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.


    All rights reserved.



    On 30-Jan-2026 at 01:34:46 EST, seller added the following information:

    Datacaciques