eBay

Item Description

Universal Fast Adhesive is an adhesive set which consists of high viscosity cyanoacrylate adhesive and activator which leads to a rapid bonding experience.

PROPERTIES

High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.

FEATURES & BENEFITS

· Extremely fast bonding

· High bonding power

· Suitable for use on vertical surfaces as it will not drip or slump

· Particularly suited to bond difficult substrates which have a porous or uneven nature since it increases the bonding strength by preventing the adhesive to be absorbed by the surface.

APPLICATIONS

· It is suitable for bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required.

· Suitable for MDF, wood, chip wood, rubber, most plastics, leather and other common substrates.

· Especially suitable for the applications where cure speed needs to be accelerated.

· Demsun A36 has a degree of gap filling ability.

· It is generally recommended for use on close-fitting parts and fairly smooth surfaces.

INSTRUCTIONS

· One of the substrates need to be smooth and have a good connection area.

· Apply a drop on one of the substrates and use spray on the other one.

· Join substrates and press firmly for couple of seconds.

· Application temperature is between +5°C and +35°C.

CLEAN UP

Wipe off excess glue immediately with a dry cloth. After curing, glue residue is very difficult to remove and Demsun Debonder Gel/Spray is highly recommended for removing it from surfaces. If your skin contacts with the adhesive wipe off the glue with warm soapy water. Using acetone is the efficient choice but it may create skin sensitivity. Cured glue is going to be peeled out after few days by itself even if you do not attempt to clean it. In the event of the product being sprayed into the eyes or mouth, the eyes or mouth must be kept open and rinsed with plenty of water. If necessary, seek medical advice.

RESTRICTIONS

· Cyanoacrylates should ideally be stored in original sealed containers until used.

· Avoid exposure to strong light and heat sources

· Cyanoacrylates can bond to skin within seconds

· Do not drip into skin or into eyes - can cause serious injury to your eyes.

· Will become hard in container if not closed properly!

· Activator is flammable. Do not throw into fire.

· Activator box is pressured. Do not crush or drill.

Size

200ML + 50G