P90 PU Foam for top quality heat and sound insulation at buildings and houses. Provides a unique, monolithic thermal insulation application without junctures, seams and gaps. An innovative alternative to traditional building insulation methods such as polystyrene heat insulation boards, glass wool and rock wool. Single-component product used with an applicator gun. It does not contain any propellant gases which are harmful to the ozone layer.

FEATURES & BENEFITS

·        Excellent adhesion to all kind of building materials

·        Can be applied easily to uneven, hard to reach surfaces where it is not possible to use traditional insulation materials

·        Excellent thermal insulation value (0.025 W/(m.K)

·        Elimination of thermal bridges

·        Elimination of the dew point

·        Yield up to 3m² with 1.5cm thickness for one layer if applied from a distance of ~40cm with normal application speed

·        No need to use mechanical fastening elements after use

·        Over Paintable

APPLICATIONS

·        Roofs, attics, facades, foundations, basements, floors, interior walls, interfloor overlappings, interior partitions, ceilings and cellars

·        Structural elements of buildings, balcony, loggia, doors, window slopes, pipes, canals and tank kind round surfaces, uneven and rough all surfaces

·        Car body and car trailers, boats, yachts, vessels and all kind of sea vehicles.

INSTRUCTIONS

·        Each can have two special plastic nozzles for spraying to the wall and ceiling. Nozzle A is for vertical surface applications and Nozzle B is for ceiling applications.

·        Optimal can temperature is +20 °C.

·        Application temperature is in between +5 °C and +30 °C.

·        Shake the can well before use.

·        Screw the can onto an applicator gun. Put the spray nozzle on the barrel until it clicks.

·        Always keep the can upside down during application.

·        The output of the foam can be regulated with the trigger and controlled with the adjustment screw on the back side of the gun.

·        Spray the foam 30-45 cm distance from the wall for vertical applications. Spray the foam 15-20 cm distance from the ceiling for horizontal applications.

·        The product can be applied at any desired thickness as long as it is applied layer by layer. The thicker, the higher insulation value.

·        For an effective insulation value, the recommended application thickness is 5cm and should be reached to this thickness with minimum 3 layers. It is not possible to get the ideal insulation value with 1 or 2 layers.

·        The nozzles and the applicator gun should be cleaned immediately after job finishes.

SAFETY

·        Contains Diphenylmethane-4, 4’-Diisocyanate

·        Harmful by inhalation, irritating to eyes, respiratory system and skin

·        Do not breathe spray/vapor

·        Wear suitable protective clothing and gloves,

·        Useonly in well-ventilated areas

·        Pressurized container. Keep away from direct sunlight and do not expose temperatures over 50 °C,

·        Do not pierce or burn, even after use

·        Keep away from sources of ignition, no smoking,

·        Keep out of the reach of children.

RESTRICTIONS

·        Storage above +25 °C and below +5 °C shortens shelf life

·        The can should be stored and transported in vertical position

·        The can should be kept in room temperature for at least 12 hours before the application

·        Cured foam will discolor if exposed to ultraviolet light

·        Paint or coat the cured foam for best results in outdoor applications

·        Lower temperatures decreases yield and curing time.

Size

850ML