Preparation:
Extinguish all ignition sources (cookers, pilot lights etc.).
Do not smoke.
Wear suitable protective gloves and safety goggles.
Wherever possible work outside.
Otherwise ensure maximum ventilation by opening windows and doors.
Do not use in enclosed spaces e.g. cellars etc. or in direct sunlight.
How to use:
1. Pour into overcap and replace screw cap immediately. Apply a thick coat with a dabbing action (2-3 mm). Do not brush out. Only apply to areas up to 0.5 meter square.
2. Once paint has blistered (5-10 mins) apply a second coat, working into the bilstered paint. Leave up to 40 mins. If dried out re-apply.
3. Remove blistered and softened paint with a scraper or shavehook. For difficult areas use an old nylon toothbrush. Repeat as necessary.
4. Wash off with detergent in cold water and a nylon scourer or use white spirit and wire wool. Allow to dry thoroughly and rub down with fine sandpaper or wire wool prior to refinishing.