Description:
The bleeder screws provide trouble-free bleeding and a positive seal
The Banjo bolts and copper washers are included for a perfect seal (where applicable)
Rear parking brake hardware is installed and lubricated where applicable
100% pressure tested to guarantee proper function under all driving conditions
Pre-lubricated guide bolts on mounting brackets save installation time and prevent seizing
Electrostatic Powder Paint Resists Corrosion
Premium Silicone Lubrication For Smooth Operation
Package Include:
2pcs Rear Brake Caliper (Left&Rear)
Vehicle Information Fitment:
for Cadillac Escalade 2002-2006
for Cadillac Escalade ESV 2003-2006
for Cadillac Escalade EXT 2002-2006
for Chevrolet Astro 2003-2005
for Chevrolet Avalanche 1500 2002-2006
for Chevrolet Express 1500 2003-2008
for Chevrolet Express 2500 2003-2005 （with 7300 lb GVW）
for Chevrolet Silverado 1500 1999 （with Dual Piston Caliper）
for Chevrolet Silverado 1500 2000-2004
for Chevrolet Silverado 1500 2005-2006 （Rear Disc）
for Chevrolet Silverado 1500 Classic 2007 （Fit Models with Rear Disc Brake）
for Chevrolet Suburban 1500 2000-2006
for Chevrolet Tahoe 2000
for Chevrolet Tahoe 2001-2004
for Chevrolet Tahoe 2005-2006 （RWD without Police Package）
for Chevrolet Tahoe 2005-2006 4WD(4-Wheel Drive)
for GMC Safari 2003-2005
for GMC Savana 1500 2003-2008
for GMC Savana 2500 2003-2005 （with 7300 lb GVW）
for GMC Sierra 1500 1999 （Dual Piston Caliper）
for GMC Sierra 1500 2000-2004
for GMC Sierra 1500 2005-2006 （Fit Models with Rear Disc Brake）
for GMC Sierra 1500 Classic 2007 （ Fit Models with Rear Disc Brake）
for GMC Yukon 2000
for GMC Yukon 2001-2006
for GMC Yukon XL 1500 2000-2006
Note:
To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part.
When to Replace Brake Calipers?
Over time in normal driving conditions, the heat generated from the braking system can weaken and break down seals inside the calipers.They can become rusty, contaminated or dirty, and start to leak brake fluid if you don’t drive regularly.
However, you should have your brakes checked immediately if you experience any of the following:
1. The brakes are continuously squeaking, squealing or grinding
2. The brake or antilock braking system (ABS) warning light comes on
3. The car jerks or pulls to one side when braking
4. You need to pump The brakes for them to work properly
5. The brake pedal feels unusually soft and spongy or hard
6. You notice brake fluid leaks around the wheels or engine compartm
How to Install Brake Calipers？
Step1 - Remove an Old Brake Caliper:
1. Raise your vehicle with a jack and remove the wheel in front of the caliper.
2. Remove the caliper bolts and pry the caliper off with a screwdriver.
3. Pull the brake pads from the caliper bracket, then remove the bracket.
4. Disconnect the caliper from the brake hose by turning the banjo bolt.
5. Secure the new caliper to the brake hose and screw the bracket into place.
6. Slide the brake pads back onto the caliper bracket.
7. Attach and secure the new caliper to the bracket with the bolts and a ratchet.
Step2- Install New Brake Caliper:
1. Get a new brake caliper that’s compatible with your vehicle
2. Unscrew the banjo bolt on the caliper that connects to the brake hose
3. Secure the hose onto the intake port on the new caliper.
4. Screw the caliper bracket against the brake rotor
5. Slide the brake pads onto the front and back of the caliper bracket
6. Attach the new caliper to the bracket so it fits around the brake pads
Step3 - Bleeding the Brake System:
1. Loosen the cap on the main brake cylinder under your vehicle’s hood
2. Connect a clear plastic hose between the bleeder valve and a bottle
3. Open the bleeder valve on the caliper until it starts leaking brake fluid
4. Ask a helper to pump the brake pedal until you don’t see bubbles in the hose
5. Reattach the wheel to your vehicle
6. Take your vehicle for a test drive to make sure the brakes work properly
