Description:
The bleeder screws provide trouble-free bleeding and a positive seal
The Banjo bolts and copper washers are included for a perfect seal (where applicable)
Rear parking brake hardware is installed and lubricated where applicable
100% pressure tested to guarantee proper function under all driving conditions
Pre-lubricated guide bolts on mounting brackets save installation time and prevent seizing
Electrostatic Powder Paint Resists Corrosion
Premium Silicone Lubrication For Smooth Operation
Package Include:
2pcs Rear Brake Caliper (Left&Right)
Vehicle Information Fitment:
for Buick Rainier Cxl 4.2L 2004-2007
for Buick Rainier Cxl 5.3L 2004-2007
for Chevrolet Trailblazer A 4.2L 2004-2005
for Chevrolet Trailblazer B 4.2L 2004-2005
for Chevrolet Trailblazer Base 4.2L 2003-2005&2008
for Chevrolet Trailblazer Base 5.3L 2008
for Chevrolet Trailblazer Ext 4.2L 2003-2006
for Chevrolet Trailblazer Ls 4.2L 2002-2007
for Chevrolet Trailblazer Ls 5.3L 2006-2007
for Chevrolet Trailblazer Lt 4.2L 2002-2009
for Chevrolet Trailblazer Lt 5.3L 2006-2008
for Chevrolet Trailblazer Ltz 4.2L 2002-2003
for Chevrolet Trailblazer North 4.2L 2002-2004
for Chevrolet Trailblazer Q 4.2L 2005
for Chevrolet Trailblazer R 4.2L 2005
for Chevrolet Trailblazer Ss 6.0L 2006-2009
for Gmc Envoy Denali 5.3L 2005-2009
for Gmc Envoy Sle 4.2L 2002-2009
for Gmc Envoy Slt 4.2L 2002-2009
for Isuzu Ascender Base 4.2L 2003
for Isuzu Ascender Ls 4.2L 2003-2006
for Isuzu Ascender Ls 5.3L 2004-2006
for Isuzu Ascender Limited 4.2L 2003-2004
for Isuzu Ascender Limited 5.3L 2004-2005
for Isuzu Ascender S 4.2L 2004-2005&2007-2008
for Isuzu Ascender S 5.3L 2005
for Oldsmobile Bravada Base 4.2L 2002-2004
for Saab 9-7X 4.2I 4.2L 2006-2009
for Saab 9-7X 5.3I 5.3L 2006-2009
Note:
To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part.
When to Replace Brake Calipers?
Over time in normal driving conditions, the heat generated from the braking system can weaken and break down seals inside the calipers.They can become rusty, contaminated or dirty, and start to leak brake fluid if you don’t drive regularly.
However, you should have your brakes checked immediately if you experience any of the following:
1. The brakes are continuously squeaking, squealing or grinding
2. The brake or antilock braking system (ABS) warning light comes on
3. The car jerks or pulls to one side when braking
4. You need to pump The brakes for them to work properly
5. The brake pedal feels unusually soft and spongy or hard
6. You notice brake fluid leaks around the wheels or engine compartm
How to Install Brake Calipers？
Step1 - Remove an Old Brake Caliper:
1. Raise your vehicle with a jack and remove the wheel in front of the caliper.
2. Remove the caliper bolts and pry the caliper off with a screwdriver.
3. Pull the brake pads from the caliper bracket, then remove the bracket.
4. Disconnect the caliper from the brake hose by turning the banjo bolt.
5. Secure the new caliper to the brake hose and screw the bracket into place.
6. Slide the brake pads back onto the caliper bracket.
7. Attach and secure the new caliper to the bracket with the bolts and a ratchet.
Step2- Install New Brake Caliper:
1. Get a new brake caliper that’s compatible with your vehicle
2. Unscrew the banjo bolt on the caliper that connects to the brake hose
3. Secure the hose onto the intake port on the new caliper.
4. Screw the caliper bracket against the brake rotor
5. Slide the brake pads onto the front and back of the caliper bracket
6. Attach the new caliper to the bracket so it fits around the brake pads
Step3 - Bleeding the Brake System:
1. Loosen the cap on the main brake cylinder under your vehicle’s hood
2. Connect a clear plastic hose between the bleeder valve and a bottle
3. Open the bleeder valve on the caliper until it starts leaking brake fluid
4. Ask a helper to pump the brake pedal until you don’t see bubbles in the hose
5. Reattach the wheel to your vehicle
6. Take your vehicle for a test drive to make sure the brakes work properly
