This fixed price listing is for 1 x Genuine Polestar Fan Motor as shown.
This range of motors is designed for the refrigeration engineer to carry as a van stock item as the various fixing points will cover most common fan motor applications. These universal motors have a long life ball race bearing fitted unlike most of the other universal motors on the market. See pictures below for full dimensions. Mains voltage is 220/240v 50/60Hz, 1 metre double insulated 3 core cable attached. The motors can be mounted using the three tapped holes on the front or back, 18mm foot or 26mm foot or corner bolts for ring or cage mounting. Rotation is anti clockwise (viewed from shaft end), speed is 1300 rpm. Available in various sizes from 5 watt up to 34 watt, please make sure you are buying the correct wattage motor for your appliance.
CONDENSOR FAN MOTORS - IMPORTANT NOTE
Please note that these fan motors are non-returnable and not supplied with any commercial warranty, if your original motor has seized or stopped working you may have an underlying problem that has led to the eventual failure of your motor, if the original cause of the failure is not rectified then you risk damaging the new motor. In most cases the motors fail due to overheating because they are running for long periods of time, this is normally due to the fridge or freezer not reaching temperature thus allowing the motor a rest period. These motors are not designed for 24/7 continuous use. For this reason motors cannot be supplied with any commercial warranty. We do strongly advise that any diagnosis and repair is carried out by a qualified refrigeration engineer who could establish what caused the original fan motor to fail.
We also stock various other Motors & Fans for a wide range of appliances. Please visit our ebay shop to see our huge range of catering parts.
All of our parts are sent out same day from our own warehouse stock.. If you have any questions please do not hesitate to contact us.
We do advise that any parts are diagnosed, installed and tested by a suitably qualified engineer.
