• Please check fitment notes & description for accurate information.
  • 2000-2003 Hyundai Accent 1.5L
  • 2001-2011 Hyundai Accent 1.6L
  • 2001-2004 Hyundai Elantra 2.0L
  • 2006-2012 Hyundai Elantra 2.0L
  • 2003-2008 Hyundai Tiburon 2.0L
  • 2005 Hyundai Tucson 2.0L
  • 2007-2009 Hyundai Tucson 2.0L
  • 2006-2011 Kia Rio 1.6L
  • 2006-2011 Kia Rio5 1.6L
  • 2010-2011 Kia Soul 2.0L
  • 2004-2009 Kia Spectra 2.0L
  • 2005-2009 Kia Spectra5 2.0L
  • 2005-2010 Kia Sportage 2.0L
  •  
  • Oxygen Sensor's Location:
  •  
  • How do I know the O2 sensor is good or not?
  •  
    • Check engine light on
    • A reduction in fuel economy.
  • 02 Oxygen O2 Sensor for 2001-2012 Hyundai Elantra 2.0L After Cat Downstream

    Please check fitment notes & description for accurate information.

    2000-2003 Hyundai Accent 1.5L

    2001-2011 Hyundai Accent 1.6L

    2001-2004 Hyundai Elantra 2.0L

    2006-2012 Hyundai Elantra 2.0L

    2003-2008 Hyundai Tiburon 2.0L

    2005 Hyundai Tucson 2.0L

    2007-2009 Hyundai Tucson 2.0L

    2006-2011 Kia Rio 1.6L

    2006-2011 Kia Rio5 1.6L

    2010-2011 Kia Soul 2.0L

    2004-2009 Kia Spectra 2.0L

    2005-2009 Kia Spectra5 2.0L

    2005-2010 Kia Sportage 2.0L

     

    Oxygen Sensor's Location:

     

    How do I know the O2 sensor is good or not?

     

    • Check engine light on

    • A reduction in fuel economy.

    • Your catalytic converter fails unexpectedly

    • Exhaust emissions reach undesirable levels.

    How to install the oxygen sensor?

    Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.

    Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.

    Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.

    Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)

    Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.

    Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.

    Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.

    Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.

    Must Know Before Buying:

    The following information is for instructional and guidance reference only. We try and make them as accurate as we can.

    If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. 

    If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.

    Items that have been installed, altered or contaminated are non-returnable.

    1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.

    2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.

    The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.

     



    Payment

    1.We accept multiple payment methods

    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 10 days as auction ended or order might be delayed.

    Shipping
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
    3. The images shown are not the actual item and are for your reference only.
    4. Fast shipping:All our packages use USPS First Class Package Service
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns

    We stand behind every product we sell.
    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    Feedback
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    2. It is impossible to address issues if we do not know about them!
    Warranty
    1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
    2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
     
    You agree to all of the above-listed policies upon bidding on and winning this auction!

    Seller Level
    Weekly Special Sell
    Shop Category
    02 Oxygen O2 Sensor for 2001-2012 Hyundai Elantra 2.0L After Cat Downstream

    Please check fitment notes & description for accurate information.

    2000-2003 Hyundai Accent 1.5L

    2001-2011 Hyundai Accent 1.6L

    2001-2004 Hyundai Elantra 2.0L

    2006-2012 Hyundai Elantra 2.0L

    2003-2008 Hyundai Tiburon 2.0L

    2005 Hyundai Tucson 2.0L

    2007-2009 Hyundai Tucson 2.0L

    2006-2011 Kia Rio 1.6L

    2006-2011 Kia Rio5 1.6L

    2010-2011 Kia Soul 2.0L

    2004-2009 Kia Spectra 2.0L

    2005-2009 Kia Spectra5 2.0L

    2005-2010 Kia Sportage 2.0L

     

    Oxygen Sensor's Location:

     

    How do I know the O2 sensor is good or not?

     

    • Check engine light on

    • A reduction in fuel economy.

    • Your catalytic converter fails unexpectedly

    • Exhaust emissions reach undesirable levels.

    How to install the oxygen sensor?

    Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.

    Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.

    Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.

    Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)

    Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.

    Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.

    Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.

    Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.

    Must Know Before Buying:

    The following information is for instructional and guidance reference only. We try and make them as accurate as we can.

    If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. 

    If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.

    Items that have been installed, altered or contaminated are non-returnable.

    1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.

    2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.

    The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.

     



    1.We accept multiple payment methods

    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 10 days as auction ended or order might be delayed.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
    3. The images shown are not the actual item and are for your reference only.
    4. Fast shipping:All our packages use USPS First Class Package Service
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    We stand behind every product we sell.
    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    2. It is impossible to address issues if we do not know about them!
    1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
    2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
     
    You agree to all of the above-listed policies upon bidding on and winning this auction!

    Copyright of CCIYU-AutoParts_All rights reserved.