For friendly product advice before you buy call us on 0151 374 1011
Vscan Receiver with Bluetooth + Transmitter Kit
Standard features of the VScan Receiver plus Bluetooth for seamless updates & data management
Key features of Vscan Receiver
The Best Cable Avoidance Tool on the Market
*Depth as standard the vScan will also give you depth on both power and sonde modes
*Self-test and daily calibration check - MyvScan will perform a test on the locators components assuring that it?s calibration is good and that all functions are working 100 per cent. The test will inform the user if a calibration is needed.
*Calibration with a service centre is required every 2 years on a VScan. The self check function gives assurance in between. Self check calibration results are automatically recorded within the equipment and can be used in conjunction with MyvScan software to print out a calibration check certificate and to store a complete self-test history of the receiver.
*Network Rail Approved
*Anti theft features - We can personalise your vScan with company name, logo and contact information.
Optional metal manhole cover detection mode, GPS & Bluetooth featured inother listings - or call us (0151 3741011) for friendly product advice, we are here to make sure you buy the right kit configuration for your needs!
* www.ncrsurvey.com for product brochure
* VAT invoice supplied with all orders.
The vScan utility avoidance tool has been designed to make buried utility detection a simple and cost-effective process. You don't need to be an electronics expert to get the most out of the vScans features. Main features and operational controls are in keeping with industry standards so minimal training is required.
The vScan locator kits are shipped with a spacious canvas carry bag which fits the receiver, transmitter, leads and any optional accessories.
Key Features Vscan Receiver
Large, high resolution, high contrast dot matrix display: makes signal interpretation simple and intuitive.
Auto backlight: for use after dusk.
Compass line direction indicator: ensures correct alignment over utility
Visual, audible and vibration alerts: alerts can be set for: shallow cable, overload, excessive swinging and overhead cables.
Passive signals: power, radio and also as a free option, cathodic protection (CP) 100Hz.
Current measurement: helps positively identify the targeted line.
Simple two button operation: on/off and information (such as depth and current).
Movable speaker: allows the user to place the speaker against the ear while holding the receiver at arm?s length
Robust ABS casing with rubber protection bumpers for all site condition use.
2GB auto data logging: helps identify usage and training needs.
Transmitter
The VM-550FF Transmitter has one induction frequency; three direct connect and a fault-find frequency. The LED indicators on the transmitter show the frequency selected, output level, and battery status. An audio indicator beeps to advise the quality of the connection.
This one-watt transmitter can transmit the locate signal onto the target line three ways. By direct connection, if direct access to the line is available, by induction by simply putting the transmitter in induction mode and placing it over the target line with the induction arrow in line with it or by clamp mode and using the induction clamp to clamp around the target line.
The wide frequency range from the VM-550FF Transmitter makes this a very versatile transmitter. The 83kHz induction frequency makes it ideal for inducing the signal onto large diameter, direct buried iron pipes with bell and gasket connections, and for using the induction clamp around smaller pipes. The lower 512Hz and 8.192kHz are good for direct connection to trace cables, and the 83kHz direct connection is good for high resistance pipes or for use with pushrod camera systems to trace the deployed pushrod. The Fault-find frequency can be used with the VM-510FFL+ to locate cables and find ground to earth faults on them.
Packaged in a lightweight, rugged, ergonomic IP54 housing, the Transmitter provides consistent current output in direct connect, clamp, and induction modes. The Transmitter has protection against inadvertent connection to incoming voltages up to 240V. The Transmitter comes standard with direct connection leads, ground stake; clip-on carry straps, and D cell batteries.