Feature:
Color: as shown
Length: about 1500mm
Bubble number: 5
Material: steel
Height: 13cm
Size: about 12.4×5cm/5”×1.97” (L*D)
Measurement range: 1.5mm
Measurement accuracy: 99
Package Include:
1 × Magnetic Gauge Tool
Note:
100% brand new and high quality
Measure the Camber and Caster angle on the wheel hub or brake disc.
Suitable for accurate checking of the castor and camber angle.
Has a simple leveling adjustment from -5 degrees to 5 degrees.
Allows adjustment to maintain correct wheel alignment and even tyre wear.
Allows you to return the strut to the camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
Easy to read and convenient to operate.
Time and money saving.
How to use :
1,Remove the four-wheel positioning sensor (fixture), remove the tire.
2,Suck the Magnetic Gauge on the side of the brake wheel carefully.
3,Adjustment the Magnetic Gauge to zero.
4,Install on the required positioning of special parts.
5,Use special tools to adjust the positioning parts to the required measurement angle, with the help of the Magnetic Gauge degree.
6, If you find a little deviation when you retest, just need to fine-tuning at the bottom of the car(Generally a little deviation does not cause positioning failure).