Innovative technology for 3 inch compression drivers, featuring Powerful neodymium motor for minimal size and weight, allows you to keep a large voice coil without sacrificing performance.
The D3220Ti-Nd has quickly become the most popular choice for car audio competition due to its impressive power-to-size ratio and ability to deliver crystal-clear high frequencies. With this innovative technology, car audio enthusiasts can now achieve unparalleled sound quality and performance in their vehicles.
Built around a pure Titanium diaphragm, this driver offers the famous PRV Audio crisp high output on high frequency response, with accuracy (from 1200 to 19,000 Hz) with an emphasis on the critical upper frequency range.
- Pure Titanium diaphragm with large 3″ Voice Coil, providing the lowest possible moving mass with excellent efficiency – 110 dB Sensitivity.
- Extremely powerful neodymium magnet for minimal size and weight without sacrificing output capability
- Works great with any Shallow Horn WGP14-50X Series – Perfect as compression driver for car audio. Mounting hardware is included.
- 2 Inch Exit horn Driver with crystal clear, high impact highs response from 1200 to 19,000 Hz
- PRO Audio high frequency driver, able to handle 300 Watts Continuous Program Power (RMS) with music for extreme output capability.
The D3220Ti-Nd neodymium titanium compression horn driver, offers the best performance for size ratio, features a powerful neodymium magnet motor.
This allows you to use this horn driver in custom doors and stuntwall systems for vocal reinforcement. We have created a compact and powerful driver that solves the critical component spacing and weight issue in large systems.
The special diameter allows front mounting, making it easy to install, without detaching the driver from any WGP14-50 Horn. The driver diameter measures only 4.88″ having enough clearance to fit inside the 5.75″ baffle cut needed for our 2″ exit horns from the WGP14-50 Series.
The titanium diaphragm is attached to a 3″ diameter copper-clad aluminum wire with Kapton® former for a high 300 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP.
- 1400 Hz at 12 dB per octave filter Crossover / BT12
- 1200 Hz at 18 dB per octave filter Crossover / BT18
The pure titanium diaphragm of this driver provides crisp output focusing on vocals and high-frequency response, making it our most famous high-frequency driver!
GENERAL SPECIFICATIONS
| Exit Throat Diameter | 2” (50 mm) |
| Nominal impedance | 8 Ohm |
| Nominal Power Handling* | 150 Watts |
| Continuous Program Power(RMS)** | 300 Watts |
| Max Peak Power*** | 600 Watts |
| Sensitivity 2.83V at 1m | 110 dB |
| Recommended Hi Pass Crossover For Full Power Handling | 1400 Hz 12db/oct Crossover |
| Frequency Response at -10dB | 1,200 – 19,000 Hz |
| Voice Coil Diameter | 3” (76.2 mm) |
| Voice Coil Wire | CCAW |
| Voice Coil Former Material | Kapton |
| Diaphragm Material | Titanium |
| Flux Density | 1.80 T |
| Magnet Material | Neodymium |
EXTRA INFO
| Overall Diameter | 4.88″ (124 mm) |
| Overall Depth | 2.21″ (56 mm) |
| Mounting Bolt circle | M6 x 4″ (102 mm) |
| Net Weight | 5.0 lbs (2.27 kg) |
| Shipping Weight | 5.27 lbs (2.39 kg) |
| Carton Dimensions W x L x H | 5.71″ x 5.71“ x 3.35″ (145 x 145 x 85 mm) |
WGP14-50X White CR
Take your custom system to the next level armed with a unique LOOK with the WGP14-50X Horn Series, a waveguide with a 2″ throat exit designed to work with any of our 2" Exit Compression Drivers.
We reduced 1.16″ off its mounting depth, compared to our rounded WGP14-50 Horn Series, giving the new design only 3.86″ of mounting depth. This increases options for custom systems, allowing you to fit more with less space, which is ideal for both custom door panels and trunk systems.
Its white matte paint gives it a distinct finish, making this new series the most unique horn in today’s car audio market!
- Compact Profile allows to mount 2″ drivers with very little depth
- Squared outside edges allow easy side or up stack of multiple drivers in a compact format
- 2″ throat with standard 4-bolt mounting pattern
- Non-resonant reinforced plastic construction
- Wide 60° x 60° Coverage with low 700Hz cutoff frequency
GENERAL SPECIFICATIONS
| Throat Diameter | 2” (50.8 mm) |
| Mounting Type | Bolt-on |
| Hole Dimensions | 0.31″ 8 mm |
| Bolt Circle | 4″ 102 mm |
| Nominal Coverage | |
| Horizontal | 60° |
| Vertical | 60° |
| Flare type | Hybrid |
| Material | Plastic (ABS) |
| Finish / Coating | Several Colors |
| Dimensions | |
| Height | 6.16″ (156.5 mm) |
| Width | 6.16″ (156.5 mm) |
| Depth | 4.37″ (111 mm) |
| Mounting Depth | 3.86″ (98 mm) |
| Baffle Cutout | |
| Diameter Circle | 5.75″ (146 mm) |
| Net weight | 0.46 lb (0.21 kg) |
