Note: Please allow slight differences due to manual measurement / screen display.

Specification:

11x4.00-5”

Tire diameter: 11"

Tire width: 4”

Rim Diameter: 6"

Bushing Size: 3/4" or 5/8"

Hub Length: 3.4"-4"-4.5"-5" Centered Hub

Fits many zero-turn mowers

300 lbs load capacity. Not for highway use.

NOTE:

Please check your existing tire sidewall for tire, hub, and bearing size to ensure proper replacement fit.

Details:

Tire Diameter: 11.00 inch

Tire Width: 4.00 inch

Rim Diameter: 6.00 inch

Bushing Size：3/4” or 5/8" (Measure inside diameter of the opening)

Hub Length: 3.4 inch (Through the center of the hub)

Fits many zero-turn lawnmowers:

This lawn mower tire is widely used on wheelbarrows, garden carts, hand trucks, pressure washers, generators, air compressors, lawn mowers and other types of outdoor power equipment

How To Change Tire Bearings:

You Will Need:

Hammer, Screwdriver

Block of Wood,

Replacement Bearings

Step One: Prop the tire up to allow room for the bearings to be removed from the hub.

Step Two: Place the screwdriver through the bearing hole until it hits the backside of the bearing on the opposite side.

Step Three: Hit the top of the screwdriver with a hammer until the bearing pops out into the bucket below.

Step Four: To reinstall bearings, rest the new bearing on the opening in the hub and place the block of wood on top of the bearing to avoid hitting the bearing directly.

Step Five: Hammer directly onto the block of wood to get the bearing in the hub.

Note:

Weight limit 120KG.

If the bearing drops freely into the hub prior to hitting with a hammer, remove the bearings and tap gently along the edge of the hub to create a tighter fi­t for the bearing.