Winding machine detailed description

1. Use elastic holder, no need to adjust belt when putting in and out.

2. One-touch lock function holder is adopted, and the holder can be easily attached and detached.

3. With door sensor function, the rotation of the holder is automatically stopped when the door is opened.

4. Built-in blue LED lighting, you can illuminate your watch more beautifully.

5. Use a silent, low-vibration, long-life motor, so you don't have to worry if you install it in your bedroom.

6. Adopting high transparency glass, sincerely conveys the beauty of your watch winder.

7. The rotation speed and rotation direction of each holder can be set independently.

8. With lock key.

Please read the instructions carefully before using them.

3 Modes Available for Each Rotator

Rotation Mode 1:OFF

Rotation Mode 2:Clock-wise

1 minute turning, and it will rest for some minutes according to your setting of the TPD, and cycle repeats.

Note: If your watch can only be winded Counter-Clock-wise, please do not choose this mode. Most automatic mechanical watches can be winded fully in this mode, but some brand not.

Rotation Mode 3:Counter-Clock-wise

1 minute turning, and it will rest for some minutes according to your setting of the TPD, and cycle repeats.

Note: If your watch can only be Clock-wise on the chain, please do not choose this mode.

Rotation Mode 4:Bidirectional

1 minute turning Clock-wise, and it will rest for some minutes according to your setting of the TPD, and 1 minutes turning Counter-Clock-wise, and it will rest for the TPD and cycle repeats.

5 TPD Choice for Each Winder

TPD : Turns Per Day. Working 12 hours a day, stop 12 hours.

TPD Mode 1 :650 TPD, rotating for 1 minute and rest for 571 seconds and then repeat.

TPD Mode 2 :750 TPD, rotating for 1 minute and rest for 487 seconds and then repeat.

TPD Mode 3 :900 TPD, rotating for 1 minute and rest for 423 seconds and then repeat.

TPD Mode 4 :1000 TPD, rotating for 1 minute and rest for 350 seconds and then repeat.

TPD Mode 5 :1950 TPD, rotating for 1 minute and rest for 150 seconds and then repeat.

For example, 650 TPD is selected. When all watches are rotating, the door sensor function is turned on. When the door is opened, all watches will stop rotating, and then take out one watch and close the door. The other watches will carry out a new cycle, rotating again for 1 minute and resting for 571 seconds, instead of working again for 12 hours. Each watch will only be rotating for 12 hours a day and rest for 12 hours.

Description of outer dimensions and switches:

Size: Length 14.57inch x Height 12.2inch x Width 7.17inch

Weight: Approximately 13.45lb

Rated Voltage: input AC 100~240V 50/60Hz, output DC 5V~12V 1.2~2.1A

Package list: Watch Winder * 1, USB power cable * 1, English instruction manual * 1, Wipe * 1, Key * 1.

* The above product image is an image of use, and the watch is not included.