| Division: | Hydraulic Systems Division |
| Flow Rate: | 20 GAL/MIN, 75 L/MIN |
| Flow Rate: | 20 gal/min, 75 L/min |
| Maximum Inlet Pressure Rating: | 5500 PSI, 380 BAR |
| Pressure Control Range: | 500-3000 PSI, 34.5-210 BAR |
| Maximum Inlet Pressure Rating: | 5500 psi, 380 bar |
| Adjustment Mechanism: | Screw |
| Standard Setting Pressure: | 1500 PSI, 103.5 BAR |
| Pressure Control Range: | 1000-3000 psi, 69-210 bar |
| Seal Material: | D-Ring (Standard) |
| Mounting Type: | Screw in cartridge valve |
| Adjustment Mechanism: | Screw |
| Standard Setting Pressure: | 1500 psi, 103.5 bar |
| Cracking Pressure: | N/A |
| Seal Material: | D-Ring (Standard) |
| Mounting Type: | Screw in cartridge valve |
| Cracking Pressure: | N/A psi |
| Maximum Flow Rate: | 20 gal/min, 75 L/min |
| Maximum Operating Pressure: | 5500 psi |
| Minimum Operating Pressure: | 380 bar |
| Maximum Tank Pressure: | 5000 psi, 350 bar |
| Maximum Pressure Setting: | 3000 psi, 210 bar |
| Pressure Control Sensitivity: | 375 per turn psi, 25.8 per turn bar |
| Reseat Pressure: | 85% of pressure setting |
| Actuation Type: | Pressure Sensing |
| Configuration: | Differential Area Relief, Differential Relief w/Reverse Flow Check |
| Leak Rate: | 5 @ 75% Crack Pressure drops/min, .33 @ 75% Crack Pressure cm3/min |
| Cavity Size: | C10-2 |
| Function: | Direct Acting |
| Operation Type: | Automatic |
| For Fluid Type: | Mineral-based or synthetic hydraulic fluids |
| Maximum Kinematic Viscosity: | 45-2000 SSU (6 to 420 cSt) |
| Filter Efficiency Rating: | ISO 4406 18/16/13, SAE Class 4 |
| Valve Material: | All parts steel. All operating parts hardened steel |
| Body Material: | N/A |
| Port Thread Size: | N/A |
| Installation Torque: | 51-55 lb-ft, 69-75 Nm |
| Operating Temperature: | -35 to +200 °F, -37 to +93 °C |
| Maximum Operating Temperature: | +200 °F, +93 °C |
| Minimum Operating Temperature: | -35 °F, -37 °C |
| Weight: | 0.5 lb, 0.23 kg |