Feature:
- Premium gas-charged cylinders
- Quality & Fitment Tested - better than the original supports that came on your vehicle
- Safely controls the drop rate of rear tailgate
- Offers leak free operation and long life
- Down compress function
- *Extended Length [in] :13.30"
- *Compressed Length [in] :9.40"
Specifications:
- Gas charged lift supports is an elastic element with gas and liquid as the working medium. It is composed of a pressure tube, a piston, a piston rod and several connecting parts. The pressure is equal, but the cross-sectional area on both sides of the piston is different. One end is connected to the piston rod and the other end is not. Under the action of gas pressure, pressure is generated to the side with the smaller cross-sectional area, that is, the elastic force of the support rod. The elastic force can be passed Set different nitrogen pressures or piston rods of different diameters.
- It has been widely used in the opening of automobile hoods and back doors, drawing machines, aviation shelves, printing machinery, food processing machinery and modern automated machinery and equipment, fitness equipment, textiles, computers, furniture, woodworking machinery, etc.
- Placement on Vehicle:Hood
Fitment:
Make Model Year Engine Body Style Note
for Ford Expedition 1997-2006 All Engine Sport Utility
for Ford F-150 1997-2003 All Engine Extended Cab Pickup
for Ford F-150 1995-2003 All Engine Standard Cab Pickup
for Ford F-150 1997-2003 All Engine Crew Cab Pickup
for Ford F-250 1997-2004 All Engine Extended Cab Pickup Not Fit F-250 Super Duty
for Ford F-250 1997-2004 All Engine Standard Cab Pickup Not Fit F-250 Super Duty
for Ford F-250 1995-1997 All Engine Standard Cab Pickup Not Fit F-250 Super Duty
for Ford F-250 1997-2004 All Engine Crew Cab Pickup Not Fit F-250 Super Duty
Package Include:
2× Lift Supports
Safety Instructions:
- The support rod and piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and buffer function.
- It is a high-pressure product, and it is strictly prohibited to analyze, roast, hit or touch it at will, and it is not allowed to be used as a handrail.
- Operating environment temperature: -35°C-+70°C. (Specific manufacture 80℃)
- It should not be subjected to oblique force or lateral force during work.
- The connection between the two installation connection points should be as perpendicular as possible to the center line of rotation when the gas spring swings, otherwise it will affect the normal expansion and contraction of the gas spring, and even cause jams and abnormal noises.
Installation Requirements:
- Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.
- Before removing the old lift support, inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.
- Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. Never force a support.
- If the ends are not lining up the support may need to be turned. To do this attach the shaft end of the support to the vehicle and then turn the entire body of the support clockwise unit the ends line up.
- Once installed, check for looseness. If you have any problems during the installation PLEASE contact us.
Notices:
1. Please check the descriptions and compatibility chart to ensure that the replacement fits your auto before your purchasing.
2. The lift supports with strong force can't be pressed by hand.
3. Please use appropriate shop manual for your vehicle to obtain specific service instruction. If you do not have an installation manual or not enough skill to install this part, it is recommended to seek the help from a qualified machanic.
