Dental Model Trimmer Dental Lab Model Trimmer for Trimming Plaster Model / Dental Trimmer
Product description
1. Product performance characteristics:
This machine is widely used in dental restoration profession, it is the necessary product for all kinds of plaster model grinding and shaping, the machine has ≥30 degrees of angle adjustment, which can make the plaster model trimming more perfect.
1. Product performance characteristics:
This machine is widely used in dental restoration profession, it is the necessary product for all kinds of plaster model grinding and shaping, the machine has ≥30 degrees of angle adjustment, which can make the plaster model trimming more perfect.
2. Instructions for use:
(1) Firstly, fix the plaster trimmer on the working table, and fasten the four ground screws to avoid vibration.
(2) Fasten the water inlet pipe and connector to avoid dislodging and splashing water into the motor to burn the motor.
(3) Tighten all connection screws of the machine to prevent loosening.
(4) Start the power supply, observe whether there is any abnormal sound of the motor, whether the rotation of the sand sheet is smooth, if there is any abnormality, stop the machine immediately and overhaul it.
(5) Observe whether the water supply has the effect of removing dust and removing the plaster powder adhered on the sand sheet. If the effect is not good, adjust the water pressure.
(6) Adjustment of sanding angle is light and flexible, <30 degrees, can be sanded into 75 degrees-105 degrees of different angles.
(1) Firstly, fix the plaster trimmer on the working table, and fasten the four ground screws to avoid vibration.
(2) Fasten the water inlet pipe and connector to avoid dislodging and splashing water into the motor to burn the motor.
(3) Tighten all connection screws of the machine to prevent loosening.
(4) Start the power supply, observe whether there is any abnormal sound of the motor, whether the rotation of the sand sheet is smooth, if there is any abnormality, stop the machine immediately and overhaul it.
(5) Observe whether the water supply has the effect of removing dust and removing the plaster powder adhered on the sand sheet. If the effect is not good, adjust the water pressure.
(6) Adjustment of sanding angle is light and flexible, <30 degrees, can be sanded into 75 degrees-105 degrees of different angles.
3. Technical Parameters:
Power requirements: 220V 50HZ
Machine power: 550W (two models)
Water pressure: not less than 0.5kg/cm
Size: 47*33*36 cm
Weight: 20kg
Power requirements: 220V 50HZ
Machine power: 550W (two models)
Water pressure: not less than 0.5kg/cm
Size: 47*33*36 cm
Weight: 20kg
Package includes:
1 x Dental Model Trimmer
1 x Dental Model Trimmer
Note:
Import duties and taxes are NOT included in the item price or shipping cost, buyer is responsible for it.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Please allow slight manual measurement deviation for the data.
Import duties and taxes are NOT included in the item price or shipping cost, buyer is responsible for it.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Please allow slight manual measurement deviation for the data.
On 19/12/2023 at 14:39:42 AEDT, seller added the following information: