Feature Introduce
AC & DC Voltage Detection Mode: Our advanced AC detection technology identifies the peak and trough voltages, supply frequency, and duty cycle of the circuit under test, providing a comprehensive analysis. The DC voltage detection feature accurately measures the voltage level, ensuring precise diagnostics.
Resistance & Diode Test Mode: This mode allows for the precise measurement of resistance between the circuit probe and auxiliary ground, ensuring the integrity of your electrical connections. The Diode Test function swiftly evaluates the performance of diode assemblies, confirming their conductivity status with ease.
Ultra Extension Inspection Cable (6m): With a 6-meter reach, our inspection cable covers the entire vehicle, from front to rear, enabling you to inspect the entire electrical circuit system with ease and efficiency.
Current Overload Protection: The V200 is equipped with a smart current overload protection system that automatically disconnects the circuit when excessive current is detected, safeguarding your vehicle's electrical system from potential damage and reducing unnecessary power loss.
Multi-language Support: The V200 offers a user-friendly interface with options in 7 languages: English, German, Spanish, French, Italian, Russian, and Portuguese, catering to a global audience and ensuring ease of use for technicians worldwide.
V200 Electrical System Circuit Tester Functions:
1. Power injection, measuring, ground testing, polarity checking, continuity testing and component activation.
2. Read the AVO meter, voltage, current, and resistance.
3. Energize the electrical components, such as the cooling fan, relay etc.
4. Activate the components
5. Determine the positive, negative and open circuit.
6. Test the bad ground contacts, follow and locate short circuits without wasting the fuse.
7. Test the continuity of the power switch, relay and diode.
8. Protect the tool from overload.
9. Allow you to work in the dark area by using the built-in head light.
10. Test along the vehicle by the long cable.
|
|
|
|---|---|---|
Quick Self-test
| Built-in Light
| 2 Charging Modes
|
Important Note
To prevent personal injury or damage to vehicles or the test Tool, read this instruction manual first and observe the following safety precautions whenever working on a vehicle:
1. Always perform automotive testing in a safe environment.
2. Wear eye protection that meets ANSI standards.
3. Keep clothing, hair, hands, tools, test equipment, etc away from all moving or hot enging parts.
4. Operate the vehicle in a well ventilated work Area: Exhaust gas are poisonous.
5. Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
Use ectreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These component create Hazardous voltage when engine is running.
6. Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged.
7. Keep a fire extinguisher suitable for gasoling/ chemical/ electrical fires nearby.
8. Don't connect or disconnect any test equipment while the ignition is on or the enging is running.
9. Keep the tool dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of the test tool, when necessary.
10. When the power switch in the tool is depressed, battery current/voltage is conducted directly to the tip which may cause sparks when contactiong ground or certain circuits.
Therefore the tool should NOT be used around flammables such as gasoline or its vapors. The spark of an energized tool could ignite these vapors. Use the same caution as you would when using an arc welder.
Specifications:
Display: TFT color display (168x 128 dpi)
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 70°C (-40 to 185°F)
External Power: 12.0 or 24.0 V power provided via vehicle battery
Dimensions (L x Wx H): 178x 47 x 28mm (7 x 1.85 x0.09 in)
Weight: 1.2Kg (0.22LB)
