With this lab equipment cleaner, critically clean processing equipment, whether it be labware, glassware, filing equipment, or processing and extraction equipment, is vital. Waxy, resin, oily, and sticky residues abound which can be highly adherent, difficult to emulsify, and just a plain challenge to remove. Detonox lab glass cleaner is not only effective, but end-user safe, aqueous, free-rinsing, interfering residue-free, biodegradable, and without any added dyes, fragrances, brighteners or softeners. In other words, perfect for cleaning medicinal “flower” extracts. Used to Remove: Cosmetic bases and formulations, organics, grease, tars, resins, waxes, fats, oils, titanium and zinc oxides, ointments, and lotions Surfaces Cleaned: Recommended for glass, stainless steel, PTFE, ceramic, cement and solvent resistant plastics, and metals. Corrosion testing is advisableCleaning Method: Soak, circulate under immersions, ultrasonic cleaners, and manual cleaning.Directions: Make a fresh 1-6% solution (1 ¼ – 3 3/4 oz. per gal. or 10-30 mL per liter) in cold, warm or hot water. If available, use very hot water to clean cosmetic residues. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe, or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in purified water.Updates from the manufacturer:Alconox Inc. is extending the shelf life of the below trademarked detergent. We have studied the stability of the detergent when used in accordance with our recommendations as set forth in ourCertificates of Analysis.Detergent samples evaluated were found to continue to conform to the acceptance criteria for a minimum of 3 years (36 months) of storage in containers that are closed after the seal is broken, andwhen not in use, stored upright in a cool dry place (15 -30°C or 60 - 90°F).Thus, Detonox® detergent (2301-1, 2305, 2355) will have a 36-month (3 year) shelf life.  Physical DataTypical ValuepH (1%)10Surface Tension 1% Sol’n32dyne/cmConductivity 1% Sol’n0.7 mS/cm at 21°CFormLiquidColorPale YellowSolubility in WaterCompletely Soluble in all ProportionsHard Water EffectivenessHighly EffectiveBiodegradabilityYes, meets EC648/2004Foam TendencyHigh FoamingShelf Life36 Months from End of ManufactureFragrance and Dye Content0%Phosphate Content0.9% as PhosphorusFlash Point (°F)NoneOrganic Carbon19% (% calculated w/w)Density9g/mL – lb/gal  For Technical Support, Questions, or Other Issues Please Email or Call Us!