The IC694MDL930 Output Module is an AC/DC output module manufactured as part of the RX3i PACSystems series. It is an 8-channel relay output module manufactured by GE Fanuc Automation as a member of the RX3i PACSystems discrete I/O PLC product line. The IC694MDL930 Output Module is intended to provide the interface between external output devices like the motor starters, solenoids, and indicators and the RX3i PLCs. It comes with 8 individually-isolated and normally-open relay outputs. Each of these outputs can be used to switch loads of 4 Amps at maximum, with each of the output points equipped with a distinct common output terminal. The GE Fanuc IC694MDL930 Output Module uses an external power supply for its operation. The users can use it with a DC or AC power module with power ratings of 24 Volts DC or 120 to 240 Volts AC for powering the connected field devices.

The GE Fanuc IC694MDL930 AC/DC Output Module operates on a voltage ranging from 5 to 250 Volts AC or 5 to 30 Volts DC at a frequency rate of 50 to 60 Hertz. The point-to-point output isolation rating of this unit is 1500 Volts AC for 60 seconds or 250 volts AC continuous. This output module features 8 individually-isolated normally-open relay type outputs with an all-out output current load of 4 Amps per point and or 20 Amps per module. The GE Fanuc IC694MDL930 AC/DC Output Module comes with 6.0 milliamps of maximum backplane current at 5.0 Volts DC. It also has 10.0 milliamps of minimum output load per point. It has 5 Amps of maximum inrush current rating and 10 milliseconds of response time for switching on and switching off