1.8V 3.3V 5 UPS Uninterruptible Power Module 18650 Lithium Battery Step Up Board
Popular
Product Introduction
Features:
1. The module can be realized through the 3.7V 18650 lithium battery and Type-C port input 5V power supply to the microcontroller uninterrupted power supply.
2. Can also be used as part of the electrical parameters of the appropriate module power supply (not directly connected to the motor).
3. The module outputs 5V, 3.3V, 1.8V in the form of 2.54mm spacing rows of pins, which can be used in a variety of scenarios as a power supply.
4. The module has 4 indicator lights, used to identify the current battery power and battery charging.
5. Easy to use, the module supports charging and discharging at the same time, there is a toggle switch on the module to control the output.
1. The module can be realized through the 3.7V 18650 lithium battery and Type-C port input 5V power supply to the microcontroller uninterrupted power supply.
2. Can also be used as part of the electrical parameters of the appropriate module power supply (not directly connected to the motor).
3. The module outputs 5V, 3.3V, 1.8V in the form of 2.54mm spacing rows of pins, which can be used in a variety of scenarios as a power supply.
4. The module has 4 indicator lights, used to identify the current battery power and battery charging.
5. Easy to use, the module supports charging and discharging at the same time, there is a toggle switch on the module to control the output.
Product Parameters:
USB port input voltage: 4.7-5.5V
Battery operating voltage: 3.1-4.3V
Battery full voltage:4.15-4.25V
MAX output current:
5V:1.5A
3.3V:400mA
1.8V:150mA
Cut-off output voltage:Battery 3V
Side discharge: output voltage is 4.5V MAX 400mA or so
Battery connection mode: parallel connection (battery can be connected to one or two)
USB port input voltage: 4.7-5.5V
Battery operating voltage: 3.1-4.3V
Battery full voltage:4.15-4.25V
MAX output current:
5V:1.5A
3.3V:400mA
1.8V:150mA
Cut-off output voltage:Battery 3V
Side discharge: output voltage is 4.5V MAX 400mA or so
Battery connection mode: parallel connection (battery can be connected to one or two)
LED Indicator Description (Right->Left).
Discharge mode.
LED1:Battery remaining ≤25% (blinking indicates that the battery is less than 3% and should be charged).
LED2:≤50% battery remaining
LED3:Remaining power ≤75%.
LED4:Remaining battery ≤ 100%
Discharge mode.
LED1:Battery remaining ≤25% (blinking indicates that the battery is less than 3% and should be charged).
LED2:≤50% battery remaining
LED3:Remaining power ≤75%.
LED4:Remaining battery ≤ 100%
Charging Mode.
LED1:Blinking indicates that the current charging power is less than 25%.
LED2:Blinking indicates that the current charging power is less than 50%.
LED3:Blinking indicates that the current charging power is less than 75%.
LED4:Blinking indicates that the current charging power is less than 100%, normally lit is full.
LED1:Blinking indicates that the current charging power is less than 25%.
LED2:Blinking indicates that the current charging power is less than 50%.
LED3:Blinking indicates that the current charging power is less than 75%.
LED4:Blinking indicates that the current charging power is less than 100%, normally lit is full.
Use and Precautions:
1, the module with a toggle switch, can control the output, when dialed to the left is off the output, dialed to the right to open the output.
2, if the battery protection chip triggered protection, installation of new batteries, open the switch indicator is not lit, you can access the usb port charging activation.
3、After shutting down the output, the indicator light will continue to light up for about 30s and then turn off; 4、Attention to the way of connecting the battery on the module.
4, pay attention to the module connected to the battery mode for parallel connection, do not connect the battery to the module in series.
5, pay attention to the distinction between positive and negative poles, reverse will burn the module (positive and negative silkscreen on the board, strictly in accordance with the silkscreen instructions for the installation of batteries).
6, pay attention to the output do not short-circuit input and output interfaces.
7, pay attention to the module output interface can not be directly connected to the motor.
1, the module with a toggle switch, can control the output, when dialed to the left is off the output, dialed to the right to open the output.
2, if the battery protection chip triggered protection, installation of new batteries, open the switch indicator is not lit, you can access the usb port charging activation.
3、After shutting down the output, the indicator light will continue to light up for about 30s and then turn off; 4、Attention to the way of connecting the battery on the module.
4, pay attention to the module connected to the battery mode for parallel connection, do not connect the battery to the module in series.
5, pay attention to the distinction between positive and negative poles, reverse will burn the module (positive and negative silkscreen on the board, strictly in accordance with the silkscreen instructions for the installation of batteries).
6, pay attention to the output do not short-circuit input and output interfaces.
7, pay attention to the module output interface can not be directly connected to the motor.
Product Tests:
Battery: 18650 with 70m Ω internal resistance.
Battery capacity 2000mAH: can output 5V1A
Battery capacity 3000mAH: can output 5V1.5A.
Battery MAX input voltage is determined by the load, MAX output current is 1.5A, the parameters can be derived from the following formula: lin=(5*lout)/(0.7*Vin)
It is recommended to use 18650 batteries with total capacity over 1500mAH.
Battery: 18650 with 70m Ω internal resistance.
Battery capacity 2000mAH: can output 5V1A
Battery capacity 3000mAH: can output 5V1.5A.
Battery MAX input voltage is determined by the load, MAX output current is 1.5A, the parameters can be derived from the following formula: lin=(5*lout)/(0.7*Vin)
It is recommended to use 18650 batteries with total capacity over 1500mAH.
Product List:
1X Module
1X Module
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
1.8V 3.3V 5 Power Module 18650 Lithium Battery Step Up Board
Product Introduction
Features:
1. The module can be realised to supply power to the microcontroller through the 3.7V 18650 lithium battery and the Type-C port input 5V power supply.
2. Can also be used as part of the electrical parameters of the appropriate module power supply (not directly connected to the motor).
3. Module in the form of 2.54mm pitch pin output 5V, 3.3v, 1.8V three different voltages, available in a variety of scenarios for power supply.
4. The module has 4 indicator lights, used to identify the current battery power and battery charging.
5. Easy to use, the module supports charging and discharging at the same time, there is a toggle switch on the module to control the output.
1. The module can be realised to supply power to the microcontroller through the 3.7V 18650 lithium battery and the Type-C port input 5V power supply.
2. Can also be used as part of the electrical parameters of the appropriate module power supply (not directly connected to the motor).
3. Module in the form of 2.54mm pitch pin output 5V, 3.3v, 1.8V three different voltages, available in a variety of scenarios for power supply.
4. The module has 4 indicator lights, used to identify the current battery power and battery charging.
5. Easy to use, the module supports charging and discharging at the same time, there is a toggle switch on the module to control the output.
Product Parameters:
USB port input voltage: 4.7-5.5V
Battery operating voltage: 3.1-4.3V
Battery full voltage:4.15-4.25V
MAX output current:
5V:1.5A
3.3V:400mA
1.8V:150mA
Cut-off output voltage:Battery 3V
Side discharge: output voltage is 4.5V MAX 400mA or so
Battery connection mode: parallel connection (battery can be connected to one or two)
USB port input voltage: 4.7-5.5V
Battery operating voltage: 3.1-4.3V
Battery full voltage:4.15-4.25V
MAX output current:
5V:1.5A
3.3V:400mA
1.8V:150mA
Cut-off output voltage:Battery 3V
Side discharge: output voltage is 4.5V MAX 400mA or so
Battery connection mode: parallel connection (battery can be connected to one or two)
LED Indicator Description (Right->Left).
Discharge mode.
LED1:Battery remaining ≤25% (blinking indicates that the battery is less than 3% and it is time to recharge).
LED2:Remaining power ≤ 50%
LED3:Remaining power ≤75%
LED4:Remaining battery ≤ 100%
Discharge mode.
LED1:Battery remaining ≤25% (blinking indicates that the battery is less than 3% and it is time to recharge).
LED2:Remaining power ≤ 50%
LED3:Remaining power ≤75%
LED4:Remaining battery ≤ 100%
Charging Mode.
LED1:Blinking indicates that the current charging power is less than 25%.
LED2:Blinking indicates that the current charging power is less than 50%.
LED3:Blinking indicates that the current charging power is less than 75%.
LED4:Blinking indicates that the current charging power is less than 100%, normally lit is full.
LED1:Blinking indicates that the current charging power is less than 25%.
LED2:Blinking indicates that the current charging power is less than 50%.
LED3:Blinking indicates that the current charging power is less than 75%.
LED4:Blinking indicates that the current charging power is less than 100%, normally lit is full.
Use and Precautions:
1, the module with a toggle switch, can control the output, when dialled to the left is off the output, dialled to the right to open the output.
2, if the battery protection chip trigger protection, installation of new batteries, open the switch indicator light is not lit, you can access the usb port charging activation.
3、After switching off the output, the indicator light will continue to light up for about 30s and then turn off; 4、Attention to the way of connecting the battery on the module.
4, pay attention to the module to connect the battery in parallel, do not connect the battery in series to the module.
5, pay attention to distinguish between positive and negative poles, reverse will burn the module (board has positive and negative silkscreen, strictly in accordance with the silkscreen instructions for the installation of batteries).
6, pay attention to the output do not short-circuit input and output interfaces.
7, pay attention to the module output interface can not be directly connected to the motor.
1, the module with a toggle switch, can control the output, when dialled to the left is off the output, dialled to the right to open the output.
2, if the battery protection chip trigger protection, installation of new batteries, open the switch indicator light is not lit, you can access the usb port charging activation.
3、After switching off the output, the indicator light will continue to light up for about 30s and then turn off; 4、Attention to the way of connecting the battery on the module.
4, pay attention to the module to connect the battery in parallel, do not connect the battery in series to the module.
5, pay attention to distinguish between positive and negative poles, reverse will burn the module (board has positive and negative silkscreen, strictly in accordance with the silkscreen instructions for the installation of batteries).
6, pay attention to the output do not short-circuit input and output interfaces.
7, pay attention to the module output interface can not be directly connected to the motor.
Product Tests: Battery: 70m Ω
Battery: 18650 with 70m Ω internal resistance.
Battery capacity 2000mAH: can output 5V1A
Battery capacity 3000mAH: can output 5V1.5A.
Battery MAX input voltage is determined by the load, MAX output current is 1.5A, the parameters can be derived from the following formula: lin=(5*lout)/(0.7*Vin)
It is recommended to use 18650 batteries with total capacity over 1500mAH.
Battery: 18650 with 70m Ω internal resistance.
Battery capacity 2000mAH: can output 5V1A
Battery capacity 3000mAH: can output 5V1.5A.
Battery MAX input voltage is determined by the load, MAX output current is 1.5A, the parameters can be derived from the following formula: lin=(5*lout)/(0.7*Vin)
It is recommended to use 18650 batteries with total capacity over 1500mAH.
Product List:
1X Module
1X Module
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
On Feb 27, 2024 at 09:07:50 PST, seller added the following information: