Delta Plus PVC7335 100% PVC Covered Protective 14" Long Glove 

Constructed of PVC on interlock cotton lining, 100% PVC-coated and Vulcanized, Highly Dexterous, Protective glove, Water and Airtight. Suitable for both Commercial / Industrial as well as Domestic use, against mechanical risks designed for general use against Micro-organisms (bacteria, fungi), Splashes of low concentrate chemical products, with no danger of electrical or thermal risks, made to EN420 / EN388 / EN374-2 / EN374-3 safety standards.

Key Product Features

Delta Plus PVC7335 Protective Glove 100% PVC Coated & Vulcanised

Designed for general use against Micro-organisms (bacteria, fungi), Splashes of low concentrate chemical products

Highly Dexterous, Protective glove, Water and Airtight

Constructed of PVC on interlock cotton lining

For use in industrial areas such as *Agriculture / Green, Mining, Heavy Industry, Vehicle / Machine Refuelling, Marine, Aviation, Offshore Engineering

Also protection against domestic *Soft & Liquid hazards such as Wastewater, Sanitation, Septic tanks, Refuse, Aquaponics, Garden Fertilisers & Feeds 

Meets EN420 / EN388 / EN374-2 / EN374-3  safety standards

Size / Dimensions

Glove Size 10

Weight 178g

Width 110mm

Length 370mm

Thickness 0.90mm

Safety Warning - Do Not use to move or handle materials with sharp or ragged edges as this may puncture or otherwise cause the gloves Air / Water protection to fail. 

If gloves are damaged or worn, do not use and replace immediately. For precise details on chemical protection please consult the manufactures website (Deltaplus). 

More Details

EN420:2003 General requirements  

5 Dexterity (from 1 to 5)

EN388:2003 Protective gloves against mechanical Risks

4 Resistance to abrasion (from 1 to 4)

1 Resistance to cutting (from 1 to 5)

1 Resistance to tear (from 1 to 4)

1 Resistance to puncture (1 to 4)

EN374-2:2003 Protective gloves against chemicals and microorganisms - Part 2: Determination of resistance to penetration. Penetration (tested as per standard EN374-2): Diffusion, at a non-molecular scale, of a chemical product and/or micro-organism through the porosities, seams, micro-holes or other imperfections present in the material of the protective glove.

EN374-3 :2003 Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals. Permeation (tested as per standard EN374-3): Process by which a chemical product diffuses through the material of a protective glove, at the molecular scale. A glove is considered resistant to chemical products if it obtains a performance index to permeation at least equal to 2 for three test chemical products included in the following list of chemical products: