Hafler P1000 Trans.Ana Stereo Power Amplifier - Convection Cooled!

For sale is the P1000 Trans.Ana dual channel amplifier from Hafler. These are convection cooled, are very low noise and are known for their detailed, clean and dynamic sound, which has seen them sought after for use in critical studio and broadcast settings.

This power amp has been tested prior to listing and is working (i.e. powers up, passes audio), and is in reasonable cosmetic condition, showing some signs of rack rash and use (see pictures). Some of the lettering has partially rubbed off in a few places and the green pilot lamp doesn't light up (presumably needs a bulb replacement) but the amplifier is otherwise fully functional.

We have two of these amplifiers available in similar condition. Please note that the auction price is per amplifier.

Auction pictures show one of the actual items for sale (both are in comparable condition). As used electronics, it is sold as is.

Note: this unit is configured for 230V AC operation and is fitted with a standard IEC panel socket on the rear. There is a mains voltage selector switch on the rear panel which provides an option for 115V mains operation.

Manufacturer's Description:

The Hafler P1000 is a single rack height, two channel professional power amplifier suitable for use in any situation where a moderately powered compact amplifier is required. The P1000 is particularly attractive for use in broadcast monitoring situations. Our trans•ana circuit topology and MOSFET output stage ensures trouble-free, long term operation.

Specifications:

• Power Rating: 50W per channel into 8 ohms, 55W per channel into 4 ohms, 110W into 8 ohms bridged mono.
• Signal-to-Noise: 100dB below rated output "A" weighted.
• Frequency Response: 20Hz to 20kHz, ±0.1dB, 0.1Hz to 100kHz, +0/–3dB.
• Slew Rate: 20 V/μs
• Input Impedance: 47,000Ω per phase balanced, 10,000Ω per phase unbalanced.
• Gain: 29dB maximum, –41dB minimum
• CMRR: –70dB at 1kHz
• Damping Factor:  900 (to 1kHz); 400 (to 10kHz); 40 (to 100kHz).
• Power Consumption: 50W/420mA @ 120VAC (idle power), 152W/1.3A @ 120VAC (1/8 power – 8Ω), 260W/2.2A @ 120VAC (max. power – 8Ω).
• Controls&Switches: FrontPanel:Powerswitch,Normal/Bridgedmonoswitch,levelcontrols Rear Panel: Chassis/Float ground switch, Balanced/Unbalanced switch 115V/230V Power line selector.
• Indicators: Power Lamp, Clip, Thermal, Signal LEDs
• Connectors: Input: Balanced: 2-way XLR and 1/4" Tip Ring Sleeve, Unbalanced: RCA; Output: Screw Terminals on barrier strip Headphone: 1/4 inch; Power: IEC 320
• Dimensions: 19"W x 83⁄8"D x 13⁄4"H (48.3cm x 21.3cm x 4.45cm); 1-Rack Space.
• Net Weight: 12 lbs. (5.45kg)

Local pickup available by arrangement, or can post at buyer's expense.