FOXWELL ST101 Pro 0.5 PSI EVAP Smoke Machine Automotive Built-in Air Pump, Flowmeter, Air/Smoke Mode, Professional Engine EVAP Vacuum Leak Detector for All DC12V Vehicles

[Automotive Leak Doctor] Notice any weird smells or fluids? Is your ride acting all wonky? Dashboard lighting up with CEL, BRAKE, AC, EVAP, STEERING, COOLANT, and more? And to top it off, your diagnostic tool spitting out codes like P0440, P0442, P0455, P0171, P0125, and more? Yes, your ride might be leaking. But no biggie! Just hook up the ST101 Pro to pump smoke into the system, see where it's puffing out! You've pinpointed the leak. Fix it up, save time and cash. Easy peasy!

[Precision Testing for Sensitive System] Providing a low pressure of 0.5 PSI, perfect evap smoke machine leak tester. it's ideally suited for precision-demanding, more sensitive systems with smaller pressure requirements, such as EVAP systems, vacuum systems, and more. Ensure testing the automotive systems under simulated normal operational conditions.

[Integrated Air Pump, Highly Flexible] Engineered for ease, ST101 Pro eliminates the need for external gas sources, offering swift setup and immediate functionality. The built-in pump ensures efficient operation while enhancing portability, allowing you to effortlessly move the smoke tester automotive wherever it's needed.
[A Must-have Flow Meter] Check out the float in the flow meter to see if there's any change - that helps confirm if there's a leak. Plus, it lets you figure out how big the leak is, down to the millimeter. Twist the knob a bit, and you can keep the smoke and air flow just right, meeting the testing needs of different car systems.

[Efficient Air/Smoke Mode] When you opt for the air mode, the flow meter helps you swiftly confirm if there's a leak. After that, switch to the smoke mode to pinpoint exactly where the leak is happening. This significantly boosts diagnostic efficiency and prevents the wastage of a large amount of smoke fluid, saving costs.

POWERFUL AND EASY TO OPERATE

The FOXWELL ST101 Pro has its own air pump, so it does not have to rely on other air machines. Connect the detector with DC12V battery, it can output lots of smoke within 30 seconds after turning on.

OVERHEAT & ANTI-FROST PROTECTION&BUILT-IN AIR PUMP&TWO MODES

Overheat Protection: When the temperature of the device exceeds 75°C, power protection will be intelligently activated to turn it off.

Anti-frost Protection: The device can also work normally at -20°C.

WIDE RANGE OF APPLICATIONS

For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats. Suitable for all car models.

Note：

1.When you use this FOXWELL S1000 Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range.

2.The testing liquid : both liquid paraffin and baby oil are OK.

3.Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.

4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.

5.During the process of leak detection, please keep away from smoke-sensitive parts.

6.Do NOT run the detector over 8 minutes continuously. It needs interval rest.

7.The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.

8.The round part of this detector has temperature, please be careful to avoid burns.

9.If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.

Q&A:

What is a smoke machine for cars used for?

Smoke machines are used to locate leaks in a car's engine, emissions, vacuum, system, and more. The smoke produced by the machine fills the gas intake system and leaks become visible, allowing the mechanic to identify the source of the problem.

Are smoke machines for cars easy to use?

Yes, smoke machines for cars are relatively easy to use. Simply connect the machine to the car's gas intake system, turn it on, and watch for smoke to appear.

Why choose 0.5 psi for checking EVAP system?

Opting for 0.5 psi is sufficient for detecting leaks in small to medium-sized automotive fuel evaporative systems, maintain the accuracy of the test without causing damage or undue stress.

What's the deal with a flow meter in testing?

We can use the flow meter's floating ball to check for leaks. We can even take a closer look and estimate how wide the leak is in millimeters. Plus, there's a handy knob to control how much smoke and air come out. Easy peasy!

What kinds of oil can I use? And once I add the 10ml, how long will it keep blowing smoke?

The ST101 Pro is all about that cutting-edge tech, keeping it light on both power and oil. Toss in 10ml smoke oil, It remains operational for a robust 40 minutes or more. Plus, you can use any type of oil—plant-based, mineral, essential oils, etc.