Roland TD-27KV2 + MDS-STD2 Electronic Drum Kit V-Drums 9 sets NEW

●Kit configuration

Drum sound module: TD-27 Ver2.0 ×1

Snare: PD-140DS ×1

Tom: PDX-100 ×3

Hi-hat: VH-14D ×1

Crash 1: CY-12C-T ×1

Crash 2: CY-14C-T ×1

Ride: CY-18DR ×1

Kick: KD-10 ×1

Drum stand: MDS-Standard2 ×1

*Kick pedal, snare stand, hi-hat stand, drum stand, chair, and SD card are not included in the product.

●Accessories: Sound source mount, AC adapter, dedicated connection cable, connection cable (for Crash 2), drum key, setup guide, instruction manual (Japanese), Roland user registration card

●Optional items: Cymbal mount [MDY] series, pad mount [MDH] series, personal drum monitor [PM] series, V drum accessory package [DAP] series, V drum mat [TDM] series, Noise Eater [NE] series

●External dimensions (required occupied area): Width (W) 1500mm Depth (D) 1200mm Height (H) 1200mm

●Main specifications

sound source

・Number of drum kits: 100 (preset: 75)

・Number of tones: 728

・User samples: Number of user samples = maximum 500 (including user samples at the time of product shipment)

・Sound length (total): 24 minutes monaural, 12 minutes stereo, File format: WAV (44.1kHz, 16/24 bit)

・Effects: Pad compressor (for each pad), Pad equalizer (for each pad), Overhead mic simulator, Room/Reverb, Multi effects: 3 systems, 30 types, Master compressor, Master equalizer

・Bluetooth: Compatible standards = Bluetooth standard Ver. 4.2

・Supported profile = A2DP (audio) / GATT (MIDI over Bluetooth LowEnergy) / Supported codec = SBC (Supports content protection using SCMS-T method) / Song player (SD card): File format = WAV (44.1kHz, 16 /24 bit), MP3 *1

・Recorder: Recording method = real time, maximum recording time = 60 minutes (temporary recording: 3 minutes) *2, file format = WAV (44.1kHz, 16 bit)

・Display: Graphic: LCD256 x 80 dots

・External memory: SD card (SDHC compatible)

·Connecting terminal:

TRIGGER INPUT jack = 1 (kick, snare, tom 1, tom 2, tom 3, hi-hat, crash 1, ride, ride bell, hi-hat control) (25-pin D-sub type) *3

TRIGGER IN terminal = 4 (crash 2, AUX1, AUX2, AUX3) (TRS standard type) *3

DIGITAL TRIGGER IN terminal = 3 (USB A type)

MASTER OUT terminal = 2 (L/MONO, R) (standard type)

DIRECT OUT terminal = 2 (MONO standard type)

PHONES jack = 1 (stereo standard type)

MIX IN terminal = 1 (stereo standard type)

MIDI terminal = 1 (IN, OUT/THRU)

USB COMPUTER terminal = 1 (USB B type)

FOOT SW terminal = 1 (TRS standard type)

DC IN terminal = 1

・USB COMPUTER terminal: Speed = Hi-speed USB, Driver mode = Generic/Vendor, Supported communication = USB-MIDI / USB-Audio *4

・USB audio: Sampling frequency (original) = 44.1kHz, sampling frequency (using sampling rate converter) = 96kHz, 48kHz, recording = 28 channels, playback = 4 channels

・Power supply: AC adapter (DC9V)

・Current consumption: 770mA

*1: Audio files must be saved on the SD card.

*2: An SD card is required for recording. If you do not have an SD card, you can temporarily record for about 3 minutes, but you cannot save it to the main unit.

*3: Exclusive use with pads that support digital connection.

*4: To use USB audio, you need to change to vendor mode and use vendor driver.