It was developed by the Ukrainian engineer UR3LMZ especially for Ham radio. Many Ham's around the world use this transverter a board and were convinced of his excellent work.
It is lot has transverter kit on 144mc to 28mc.
Many Ham's around the world use this transverter and were convinced of his excellent work.
Transverter has full complete parts:
Transverter board (assembled and tested) - 1pcs
Attenuator board (assembled and tested) - 1pcs
Strong aluminum case* 14cm x 12cm x 5cm (5.5x4.72x1.97inc) - 1pcs
BNC antenna conneсtors - 3pcs
PLS connectors (for connection to transverter board) - 2pcs
PTT connector - 1pcs
Power supply connectors ( 1pcs male + 1pcs female)
Power switch - 1pcs
LED 3Volt (red) - 1pcs
Power cord wire 0.75m (29.5inc) - 1pcs
Wires 1m (39.3inc) - 1pcs
High quality 50 ohm coaxial cable 0.5m (19.7inc) - 1pcs
Bolts, nuts - 5pcs
Plastic screeds - 3pcs
Shematic diagram and tips to assembled the kit - 1pcs
* color covers of casing can differ from show on a photo
You need to install details in the case and to solder as on the schematic.
To get the transverter worked you have to do some soldering works with a cables and wires. Probably some instruments would be required.
With this transverter you can operate on 144mhz band using any type of the HF radio at 28 mhz. It works any modes such SSB, CW or FM if your radio has them.
Applying 10 to 15Watts to this transverter on 10m band you get 10 to 15 W output power on the 144mc band.
Before switching to transverter operation mode to set output power of your HF radio to 10-15 Wt.
Information about this transverter:
DC current is 12V to 14V.
Current consumption - typ 2A (TX)
TX Output transistor is RD15HVF1
The Output power on 144 mc - 10 to 15W
RX Input transistor is BF998
PTT to the ground.
Size of the box is 14cm x 12cm x 5cm (5.5x4.72x1.97inc)
Weight - 0.31 kg
If you need only transverter board on 144mc to 28mc please see here.
