Includes 1 black battery adapter with detachable xt60 12AWG water resistant tinned copper wires 

All adapters now made in outdoor heat and chemical resistant material

For use with M4 or #6 mounting screws

Note:This is not a charger or converter, it only outputs battery voltage and power directly from your battery.

• Do not use this adapter to charge your battery 
  
• Do not short circuit battery or draw more than 20amps continuous
  
• Disconnect the battery before it reaches  (Max battery voltage/4.2)*3.3 = typical low voltage threshold
  
• Do not leave battery charged at 100% for long periods of time, recommended to store battery at 70% charge (prolongs battery life)
  
• Do not leave battery outdoors (expecially in hot climates)
  

All power adapters designed and assembled in Ohio, USA

As of 2020 all adpaters are now made in heat and chemical resistant material.

Note: All battery adapters are designed and manufactured by Terrafirma Technology and are compatible for use with batteries manufactured by other brands. We are not affiliated with DEWALT®, MILWAUKEE®, RYOBI®, KOBALT®, Porter Cable® and/or any other brands.

Warning: To use this adapter properly, we recommend using a fuse thats rated about 30% higher than the max current you expect to draw. We also recommend adding a low voltage disconnect circuit or a timer to prevent the battery from dropping past low voltage threshold (which will damage the battery or shorten its life span); (Max battery voltage/4.2)*3.3 = typical low voltage threshold. To protect your device you should convert your voltage using a DCDC converter to match your device's acceptable voltage range. We do not recommend buying our adapters without fully understanding how to use it properly, protect the battery, and the device you intend to power.