SLOW SET ADHESIVE - TECHNICAL INFORMATION:

Features:
• No additives to mix, just add water.
• Suitable for wall and floors.
• Suitable for ceramic, porcelain and natural stone tiles.
• Suitable for use with underfloor heating systems.
• Ideal for fixing tiles to most common building substrates including sand/cement render, screeds, brick and block work, existing tiled surfaces and over boarded wooden floors.
• Water proof when set.
• Long workability +/- 2 hours.
• Suitable for internal and external use, (frost and ice resistant).
• Floor tiles will not sink down into adhesive as the adhesive is drying.
• Mixes very easily and consistently.
 
Technical Specification:
• Standard Conformities: EN 12004 Class C2 TE S1.
• Coverage 3 - 10sqm per 20kg depending upon, floor or wall application. Surface irregularities, depth of adhesive required.
• Bed thickness: 3mm - 20mm.
• Working Time @ 20°c +/- 2 hours
• Set time: +/- 16 hours.


 20.00 Kg

ProRapid RS is a rapid set, polymer modified, premium grade cementitious tile adhesive, ideal for natural stone, porcelain and ceramic tiles where exceptional bond and rapid set are essential. It is suitable for both wet and dry conditions and is formulated to adhere to most common substrates including screwed and fixed over-boarded wooden floors.

  • Porcelain & natural stone tiles
  • High strength
  • Underfloor heating
  • Floor & wall
  • Internal & external
  • Frost-resistant
  • Available in white and grey
  • Classified C2FT



RAPID SET - TECHNICAL INFORMATION:

Features:• No additives to mix, just add water.
• Suitable for wall and floors.
• Suitable for ceramic, porcelain and natural stone tiles.
• Suitable for use with underfloor heating systems.
• Ideal for fixing tiles to most common building substrates including sand/cement render, screeds, brick and block work, existing tiled surfaces and over boarded wooden floors.
• Water proof when set.
• Sets fast and can be grouted over approximately 3 hours after tiles are fitted.
• Suitable for internal and external use, (frost and ice resistant).
• Floor tiles will not sink down into adhesive as the adhesive is drying.
• Mixes very easily and consistently.

Technical Specification:
• Non Slip - Euro compliance code C2FT.
• Coverage 3 - 10sqm per 20kg depending upon, floor or wall application. Surface irregularities, depth of adhesive required.
• Bed thickness: 3mm - 20mm.
• Working Time @ 20°c +/- 40 minutes.