You are looking at the simplest and most affordable way to add remote hydraulics to your Kubota tractor.  Whether you’re planning to attach a hydraulic top link to your 3-point hitch, a grapple arm to your loader, or any other function, this simple system utilizes your existing loader control valve to control your remote cylinders.  

• No modification of your hydraulic system is required

•  It doesn’t touch your electrical system

• No drilling is required on tractors newer than 2003 - mounting bracket is included

With a simple push/pull of the valve, you select which operation you’d like to control.   The valve automatically holds the load on the inactive circuit, and you control the active cylinder(s).  The valve can be moved under load with just a pull of your fingers, and the inactive cylinder is locked in place.  No need to understand hydraulics or worry about compatibility of open/closed center systems, this system just plugs in, and can be installed or removed in under 15 minutes.

This system works well with loader installed or off (tractors newer than 2003), and retains the quick-install functionality for your loader.  All quick-connect connections are maintained, so you’ll never know this is installed, until you want to use it.   

The factory rear remote kit can cost $1500+, other kits use complicated electronic solenoid valves, and some people have hacked in to their hydraulic system to braze in connections – yikes!    This kit is incredibly simple, and foolproof to install in 15 minutes.   This is what I use on my personal tractor, and have installed on over 25 tractors now, with great results.  I include photo instructions, and all the parts so that you can confidently install on your Kubota!

The Plug&Play Kit  includes everything from the economy kit, plus the Kubota-style quick connects to attach the valve kit to your hydraulic system without even turning a wrench.  You'll just disconnect two quick-connect fittings to your loader, and pop this system in between those connections. In minutes!!

The Plug&Play Kit for Cab Tractors includes everything in the Plug&Play kit, with accessories and longer hoses to run controls in through an access port in the back of your cab.   Same simple system, with a clean install inside your cab.  ~1 hour install.

Compatibility:

• Kubota B, BX, L, LX, MX, and M Series tractors with factory front-end loader installed (Complete compatibility list below)
• Please send me a message with the year and model # of your tractor, and the model # of your loader before I ship the kit, to make sure you get the perfect kit for your tractor.  

Included in the kit:

• Switching Valve (Made in the USA, with warranty 
• Hoses
• Fittings    
• Mounting Bracket (2003 and later tractors)
• Hoses to front/rear of tractor
• Quick-Connect Ag-type fittings (Pioneer 4000 series - push-connect) 
• Breakaway Quick-Connect Mounting 

All hoses installed with proper sealant, and will install with just connecting two hoses and mounting the valve - Economy kits can be installed in under 30 minutes, Pug-N-Play kits in under 15 minutes!

Video showing complete install and demonstration of the kit.   2nd video shows installation of the updated kit with NO DRILLING!