2x 10MB800FT Midbass Speaker Pro Audio Low Frequency 8 Ohm - 1600 Watts Package - 800 Watts each speaker
FEATURES:
For high output speaker systems, PRV Audio’s 10MB800FT midbass is an excellent option capable of amazing performance. A great new addition to the Forte Series, where more power handling and less distortion on midlow midbass frequencies is the key.
10MB800FT delivers top-notch midbass punch and clean vocal clarity at a high level output with low distortion and extended midbass response.
Optimized for use in compact enclosures, this midbass speaker provides a smooth vocal response with great output from 500 Hz to 1500 Hz and useful response up to 6,500 Hz, making it a great choice for larger 2 and 3 way systems.
2.5″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 Ohm
Ventilated voice coil gap reduces power compression
High Xmax 10” Loudspeaker for more mid bass output
800 watts continuous program power rating makes the high acoustical output
Excellent performance in 2-way or 3-way systems
To get superior fidelity, the special composite cone is built with non-pressed paper for a reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
The Perfect speaker for TUKUTEO sound.
The high sensitivity rating of 99 dB 1W/1M which makes it capable of generating a lot of output! This 10″ is a great midbass option for pro audio systems or high SPL automotive systems, where extremely high output is required.
The voice coil is wound on a 2.5″ glass fiber with aluminum wire keeping weight to a minimum for an incredibly quick transient response.
Engineered with 11 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability.
Combined with its premium ferrite motor, all these characteristics make this speaker unique and deliver high-performance that achieves exceptional clarity, detail, and dynamics on sound.
Popular custom door panel combination with the 10MB800FT and WG2000Py Slim Mids & Highs Compression Driver all tuned by Our DSP 2.8X ( digital sound processor ) for the best frequency response, follow settings below:
10MB800FT – High Pass Filter HPF 110 Hz BT18 Filter to Low Pass Filter LPF 1800 Hz BT12, following the compression driver from 1000Hz all way to 17,000Hz
Recommended system package 8x 10MB800FT + 4x WG2000Py SLIM
PRV 10″ Midbass Speaker 10MB800FT 800 Watts / 8 Ohm High Power PRO Audio Low Frequency Loudspeaker
2 Speakers – 1x MDX2000.2 at 2 Ohm, 2 speakers in parallel on the bridged channel 4 Speakers – 1x QS3000 at 2 Ohm, 4 speakers in parallel 8 Speakers – 1x QS7000 at 1 Ohm, 8 speakers in parallel
Recommended HPF using PRV Digital Signal Processor DSP when using up to 650 Watts RMS musical power ( without clipping )
120 Hz at 12 dB per octave filter Crossover / BT12
110 Hz at 18 dB per octave filter Crossover / BT18
If you have compression drivers on your system the recommended LPF is 2,200Hz at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.
GENERAL SPECIFICATIONS
Nominal Diameter
10″ (254 mm)
Nominal impedance
8 Ohm
Nominal Power Handling
400 Watts
Continuous Program Power (RMS)
800 Watts
Max Peak Power
1600 Watts
Sensitivity 2.83V at 1m
99 dB
Recommended High Pass Filter* *For Full Power Handling
