PLEASE NOTE: MEASURE YOUR POLE FIRST
Choose the size that matches the outside diameter of your pole: 44 mm, 51 mm or 62 mm. Not sure? Send me a message before you buy.
Pole Clamp with 3-Prong Action Camera Mount (44, 51 or 62 mm)
Fit a camera to your pole in seconds. This clamp grips round poles and gives you a 3-prong action camera mount on top. It is ideal for gutter vacuum poles, so you can see what you are cleaning from the ground. Printed in tough grey PETG and made in the UK.
Three sizes to choose from 44 mm, 51 mm and 62 mm, so it fits your pole properly.
How it works
The clamp wraps round your pole and tightens with the clamp screws. Your camera then fixes to the 3-prong mount with the thumbscrew. Loosen the thumbscrew to angle the camera, then tighten it again.
Features
- Three sizes: 44 mm, 51 mm or 62 mm to suit your pole.
- Standard 3-prong mount: works with action cameras that use the common 3-prong fitting.
- Tough grey PETG: strong and a good choice for outdoor use.
- Screws and nuts: for a firm grip on the pole.
- Made in the UK: designed and 3D printed by me.
Check before you buy
| 44 mm clamp | For poles 44 mm outside diameter |
| 51 mm clamp | For poles 51 mm outside diameter |
| 62 mm clamp | For Flexi-Neck 62 mm outside diameter |
| Material | PETG, grey |
| Camera mount | 3-prong |
Measure the outside of your pole with calipers, or wrap string round it, measure the string and divide by 3.14. Not sure? Measure yours or send me a message and I'll happily help.
Optional extra: magnetic quick-release mount
Choose the extra option to add a magnetic quick-release mount for the DJI Osmo Action 3, 4 and 5. It lets your camera clip on and off in a moment.
Using a phone
The clamp can also hold a phone. You will need a 2-prong phone adapter, to match the clamp's 3-prong mount, and a phone clamp. The phone adapter and phone clamp are not included.
Fitting
- Open the clamp and place it round your pole where you want the camera.
- Tighten the clamp screws until it holds firmly. Don't over-tighten.
- Slot your camera mount into the 3-prong fitting and fix it with the thumbscrew.
- Angle the camera and tighten the thumbscrew.
What's included
- 1 x pole clamp in the size you choose
- Clamp screws and nuts
- Thumbscrew for the camera mount
- DJI Osmo Action magnetic quick-release mount, only if you choose the extra option
- NOT included: camera, phone, pole or vacuum, phone adapter, phone clamp