Features:
- New upgrade: Battery Monitor can measure and display battery capacity, voltage, temperature, percentage. Added type c and usb interface, built-in external temperature probe can be used as temperature sensor. After setting the parameters, it has a power-off memory function, and there is no need to repeat the setting.
- Adapter battery: The digital battery monitor is suitable for DC8-30V (12V, 48V) lead-acid batteries, ternary lithium batteries, and iron lithium batteries. The factory default battery parameters are lead-acid 1P-12V, which has a wider range of applications and can meet your basic needs to the greatest extent.
- Safe to use: with low voltage alarm setting, input reverse connection protection, reverse connection of positive and negative poles will not burn.
- Six modes: 3 battery types are set as lead-acid P, ternary lithium L, iron lithium F; custom setting of high and low voltage range; backlight time setting, low voltage alarm setting.
- Wide range of applications: The battery monitor can be widely used in electric vehicles, motorcycles, bicycles, boats and other facilities that need to monitor batteries
- Voltage intelligent calibration: When you need to calibrate the voltage of the meter, disconnect the power, press and hold the on/off button, turn on the power, enter the calibration mode and release the button, then long press the on/off button for 2 seconds to start automatic calibration (calibration). The letter V will flash when the calibration is completed, and the letter V will be always on after the calibration is completed); the reason for the failure of the calibration: the error of the external power supply is too large or the external power supply is not a DC30V power supply, resulting in a calibration error, please replace the external calibration power supply and re-calibrate
Specifications:
Input voltage: DC 8-30V
Voltage Measuring range: DC 8-30V
Compatible battey type: Ternary Lithium / Lead-acid / LiFePO4
USB output: QC2.0, QC3.0, maximum output 18W (5V-3.4A, 9V-2A, 12V-1.5A)
Typec output: QC2.0, QC3.0, maximum output 18W (5V-3.1A, 7V-2.4A, 9V-2A, 12V-1.5A)
Ternary Lithium battery: 3S to 7S (power off memory)
Lead-acid battery: DC 12V, DC 24V (power off memory)
LiFePO4 battery: 3S to 8S (power off memory)
Custom setting high and low voltage range: DC8-30V
The front is the switch button, and the back is the setting button. Please set the parameters before installing and using.
Package Includes:
1x Battery Capacity Voltage Meter
1x Cable
Note:
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Please allow 1-5mm slight manual measurement deviation for the data.