The Line 6 M9 Stompbox Modeler puts an entire pedalboard into one compact enclosure. It carries the model library built up across the DL4, MM4, FM4, DM4 and the larger M13, and lets you run three of those effects at the same time, each on its own footswitch with its own set of knobs. There are no menus to dig through for basic use: pick an effect, turn the knobs above it and step on the switch, exactly as you would with three individual stompboxes.

Key Features:

Over 100 effects on board — 109 models with the 2.01 firmware, covering distortion, compressor, EQ and volume (30), modulation (22), filter and pitch (26), delay (19) and reverb (12), all taken from Line 6's classic M13 and stompbox modelers.
Three simultaneous FX units, each with a dedicated footswitch, a bright display and three assignable knobs, so three effects can be edited and switched independently in real time.
24 scene memories — up to 6 scenes in a Scene Folder across 4 folders — for storing complete three-effect setups and recalling them instantly on stage.
Built-in looper of roughly 28 seconds (extended when half-speed is engaged, with reverse playback available) plus a built-in chromatic tuner, both reachable from the front panel.
Full stereo signal path with two 1/4-inch inputs (L/R) and two 1/4-inch outputs (L/R), so the M9 can sit in front of an amp, in an effects loop or feed a stereo rig.
MIDI In and Out for program changes and parameter control, and two 1/4-inch expression pedal inputs for real-time control of wah, pitch, delay mix and other parameters.
Powered by 9V DC, 2000mA, center-positive (2.5mm). The bundled Japanese adaptor runs on AC 100V, so a step-down transformer is required outside Japan; alternatively any 9V DC 2000mA center-positive supply of the same rating can be used.
• Compact for what it holds: 266.7 x 165.1 x 60.9 mm, 1.36 kg, small enough to share a pedalboard rather than replace it.

Authentic product from Japan. Fast shipping from Japan. Don't miss this chance!

Condition Summary:
[A] Very Good Condition – Lightly Used
In good working condition with no issues found in operation.
Light signs of use on the enclosure and on the footswitch caps from normal pedalboard use.
The display window, the control knobs and the 1/4-inch input, output, expression and MIDI jacks are clean.
Includes the M9 unit and an AC adaptor, and everything shown in the photos.
The adaptor is a Japanese AC 100V type, and the cable on its wall-plug side has been slightly shortened by a previous owner. A step-down transformer is required outside Japan, or you can use any 9V DC 2000mA center-positive (2.5mm) supply instead.

Shipping & Import

Ships from Japan by DHL, FedEx or Japan Post with tracking.

United States — duties includedImport duties and taxes are already included in the item price (DDP). You will not be charged any additional fee on delivery. If a carrier mistakenly asks you for duties, contact us — do not pay.

All other countries — duties not includedImport duties and taxes are not included in the item price or shipping cost. Import duties and taxes are the buyer's responsibility.Please check with your country's customs office to determine these additional costs before purchasing. Remote-area delivery may also incur an additional $15–20 carrier charge.

Condition Grades

NFactory Sealed — Brand New Unopened, still in the original factory packaging.
OOpen Box — Unused Opened for inspection only. Never used. All accessories present.
SExcellent — Near Mint Almost like new. Only the faintest marks. Fully functional.
A Very Good — Lightly Used Light signs of use such as small scratches or slight discolouration. Fully functional.
BGood — Noticeable Wear Clear signs of use — scratches, dents or marks. Works well and has been inspected.
CFair — Cosmetic Flaws Operates normally but has cosmetic faults such as staining, fading or larger scratches.
DAcceptable — Heavy Wear Heavy use or damage, but the item works.