PETG 3D Printed Enclosure for P10 Single Color SMD LED Matrix Display – 32x16 Pixels
This enclosure is designed specifically for a P10 Single Color SMD LED Matrix, creating a compact finished housing for your LED display and controller electronics.
Dimensions:
- Enclosure is suitable for SMD P10 display with approximately 13mm thickness.
- Space for P10 Single Color SMD LED Matrix, 32x16 pixels
- Approximate display size: 320 x 160mm
- Enclosure: approximately 324 x 164 x 60mm
- 2mm added around every side of the display
- Weight: Less than 0.5kg (1.1lbs)
- Designed for DIY Electronics
- Displays are NOT included
There is room inside for a variety of controllers, including:
- BuildCircuits / Scoreduino matrix drivers
- ESP32 matrix drivers
- Arduino UNO
- Arduino Mega
- Adafruit Matrix Portal S3
- Other third-party matrix controllers
The power switch and DC barrel socket(5.5x2.1mm) are positioned on the left side.
Magnetic Mounting
Six stainless-steel strips are glued to the internal stand-offs. Magnetic screws installed on the display attach to the strips and hold the LED module securely.
A thin ruler or similar tool can be inserted through the rear ventilation openings when you need to remove the display.
Display magnets/magnetic screws are not included.
Cooling
Rear ventilation openings allow air to circulate through the enclosure and help cool the LED matrix and controller.
PETG Construction
PETG provides a strong, durable material for this type of functional enclosure. It has good impact resistance, strong layer adhesion and better heat resistance than PLA.
The glass-transition temperature of PETG is approximately 80°C. For reliable long-term use, keep the enclosure environment at approximately 70°C or below.
Package includes:
1 × PETG enclosure
1 x Power switch
1 x DC barrel connector (5.5x2.1mm)
4 × stainless-steel metal strips
2 × 40 × 40 × 4mm wall-mount brackets
4 x M4 magnetic screws for the P10- 32x16cm Indoor/outdoor SMD LED Display
P10 SMD display is not included.
Small layer lines, marks and glue marks are normal characteristics of a 3D printed enclosure. It is not intended to compete with an injection-moulded enclosure in cosmetic perfection; instead, it is designed to work well, hold your electronics securely and give your project a professional finished appearance.
Customization is available. Please contact us before ordering if you require modifications.